Item Records

This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.

The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.

These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.

  • Data
  • Data Source

This information was automatically generated from data provided by National Museum of Natural History. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.

Notes

FROM CARD: "ILLUS. IN USNM REPT 1894, FIG. 252, P. 562." Identified in publication: "... model of a sled from Anderson River consisting of high solid runners and crossbars. The runners have a long bevel in front and a short one in the rear, and are sawed off at the ends. There are three crossbars, broad in the middle and chamfered at the ends for the lashing. Near the upper border of the runners holes are gouged through the wood as long as the end of the crosspiece is wide. A double lashing passes over the end and through these holes so as to give a double bearing or brace. This is a very common method of attachment among the ... [Inuit]. In the model the lashing is done with rawhide and sinew twine. This example reproduces with considerable faithfulness the construction of the aboriginal types. The shoeing on the bottom of the runners is fastened on with pegs of wood. Length, 12 inches."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/45 , retrieved 12-17-2019: Model of a qamutik sled made from wood. The bottom edges of the runners are cut aslant at the front and back. Three crosspieces are attached to the tops of the runners by sinew and hide lashings that loop over each end where they project beyond the runners, pass through a corresponding slot in the runner, and then loop over the crosspiece again just inside the runners. Grooves cut through the runners near each end would have been used for tying down cargo carried on the sled. More information here: http://www.inuvialuitlivinghistory.ca/item_types/72: The MacFarlane Collection contains small models of several types of sleds used by Inuvialuit for travelling on snow-covered ground. These models may have been commissioned since full-size sleds would have been difficult to ship the the Smithsonian Institution.

Item History

With an account, you can ask other users a question about this item. Request an Account

With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account

Similar Items