Item Records

This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.

The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.

These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.

This item is culturally sensitive and images of it can not be shown. More information

  • Data
  • Data Source

This information was automatically generated from data provided by MOA: University of British Columbia. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.

Description

Two bentwood chest panels. Part a: flattened panels with a short side and a longer side divided by a bevelled channel on the reverse, painted with an expansive design in black and red on the longer side and a face inside an ovoid with a red u shape at the top and bottom on the smaller side; Part b: flattened panels with a short side and a longer side divided by a bevelled channel on the reverse, painted with an expansive design on the longer side and a face inside a slightly more elongated ovoid with u shapes at the top and bottom on the shorter side.

History Of Use

Bentwood boxes were used primarily for storage of food, implements, and ceremonial regalia, but were also used for cooking and serving food. They were trade goods or gifts, and were symbols of wealth and prestige. Boxes used for ceremonial purposes were usually more highly decorated than those for utilitarian use.

Specific Techniques

Bentwood, or kerfed-corner, containers are constructed by a process unique to the Northwest Coast Indigenous peoples. The carver begins with a single straight-grained plank of red cedar, or sometimes yellow cedar, spruce, or yew. The surface of the plank is finished with chisels, adzes, and knives; in earlier times, it was smoothed further with sandstone or dried sharkskin. Then three parallel kerfs, or grooves, are carved out at measured points across the width of the board, at right angles to the long edge. The kerfs, which will become three corners of the box, allow the board to be steamed until the wood fibres are softened, and then carefully bent to form a box with symmetrical sides. The final corner, as well as a fitted base, are joined and fastened with pegs (through drilled holes) or laced with spruce root or twisted cedar withes (branches). Storage boxes also have fitted lids of cedar, hollowed from the inside. Finally, painted compositions may be applied to the completed box and shallow carving added to bring the forms into relief. A well-made bentwood box is watertight. Historically, most boxes were used to store preserved foods and material goods; plain cooking boxes could be used to steam or boil food by adding water and heated stones.

Item History

With an account, you can ask other users a question about this item. Request an Account

With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account

Similar Items