Plaque
Item number 2853/4 from the MOA: University of British Columbia.
Item number 2853/4 from the MOA: University of British Columbia.
This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.
The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.
These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.
This information was automatically generated from data provided by MOA: University of British Columbia. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.
A cast metal plaque depicting four male figures. The figures stand shoulder to shoulder, each with a helmet-shaped headdress and ringed neck decoration extending down to cross the chest over the ribs. Each figure has a uniquely patterned skirt decorated with, from left to right, dots, dots and zigzags, horizontal bands with dots, and a leaf pattern. The faces of the figures have prominent eyes and mouths, and wide noses. Shoulders are prominent and rounded, arms slightly bent and hanging down at sides, with hands flat on thighs. Shins and ankles extend from the bottom of the skirts and end in flat, forward-protruding feet. The rear of the plaque is concave behind each figure, and a metal ring for hanging is attached at top centre.
Bronze or brass casting in Benin used the lost-wax method. The first stage of this process requires the creation of the final design in beeswax, moulded over loosely modelled clay. The beeswax is then covered in clay and fired. The heat melts the beeswax, leaving a hollow clay mould that is then filled with molten metal. Once the metal is cool, the clay may be broken away, leaving a figure in the shape of the initial wax model.
Marcel Ollivier was the French Consul General posted to Freetown, Sierra Leone, c. 1960s-1970, during which time he purchased this collection of objects (2853/1-9). He later finished his diplomatic service in Vancouver as French Consul General from 1982-1986, after which he retired to England. The objects were donated to MOA at the specific request of Ollivier, via his daughter-in-law.
This bronze plaque depicts human figures standing shoulder to shoulder. All are male, and may be low-ranking members of the Benin court, possibly emada (pages)? The way they are displayed suggests they are all of equal status within the court.
Made with the cire-perdue or lost-wax method. The mould is made of beeswax, covered with clay, and then fired. The wax melts and the hollow clay cast is then filled with scraps of copper-based alloy, before being fired for a second time. XRF analysis suggests the piece is made of a leaded gunmetal (also called 'red brass' - a bronze alloy), with some arsenic.
This data has been provided to the RRN by the MOA: University of British Columbia. We've used it to provide the information on the Data tab.
Marcel Ollivier was the French Consul General posted to Freetown, Sierra Leone, c. 1960s-1970, during which time he purchased this collection of objects (2853/1-9). He later finished his diplomatic service in Vancouver as French Consul General from 1982-1986, after which he retired to England. The objects were donated to MOA at the specific request of Ollivier, via his daughter-in-law.
A cast metal plaque depicting four male figures. The figures stand shoulder to shoulder, each with a helmet-shaped headdress and ringed neck decoration extending down to cross the chest over the ribs. Each figure has a uniquely patterned skirt decorated with, from left to right, dots, dots and zigzags, horizontal bands with dots, and a leaf pattern. The faces of the figures have prominent eyes and mouths, and wide noses. Shoulders are prominent and rounded, arms slightly bent and hanging down at sides, with hands flat on thighs. Shins and ankles extend from the bottom of the skirts and end in flat, forward-protruding feet. The rear of the plaque is concave behind each figure, and a metal ring for hanging is attached at top centre.
This bronze plaque depicts human figures standing shoulder to shoulder. All are male, and may be low-ranking members of the Benin court, possibly emada (pages)? The way they are displayed suggests they are all of equal status within the court.
Bronze or brass casting in Benin used the lost-wax method. The first stage of this process requires the creation of the final design in beeswax, moulded over loosely modelled clay. The beeswax is then covered in clay and fired. The heat melts the beeswax, leaving a hollow clay mould that is then filled with molten metal. Once the metal is cool, the clay may be broken away, leaving a figure in the shape of the initial wax model.
Made with the cire-perdue or lost-wax method. The mould is made of beeswax, covered with clay, and then fired. The wax melts and the hollow clay cast is then filled with scraps of copper-based alloy, before being fired for a second time. XRF analysis suggests the piece is made of a leaded gunmetal (also called 'red brass' - a bronze alloy), with some arsenic.
Let the RRN community answer your questions
With an account, you can ask other users a question about this item. Request an Account
Share your knowlege of this item with the RRN community
With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account