Replica Weight
Item number 3123/73 from the MOA: University of British Columbia.
Item number 3123/73 from the MOA: University of British Columbia.
This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.
The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.
These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.
This information was automatically generated from data provided by MOA: University of British Columbia. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.
Silver coloured metal weight. Object is crescent shaped, very thin, with a bored hole along the convex edge. Edges are roughly cut.
This object was not used as a gold weight; it was most likely created to be sold to tourists, and was made as a response to the legacy of weights. Its colour, style, and workmanship show its modern origins. Akan weights would not have such rough edges or rusted as this object has, as those who owned weights took pride in them, and desired them to have an aesthetic appeal. Gold weights were historically made and used by the Akan peoples to weigh powdered gold ('gold dust'), which was used as the standard currency from the seventeenth to mid-nineteenth centuries. Locally referred to as abrammuo (singular mrammuo), they were usually made of a brass alloy and were based on the Islamic weight system. Each form had a known measurement, and those engaging in trade at that time would own a full set of weights. The pieces were cast using the lost-wax technique, ranging in form from simple geometric designs (thought to be the earliest forms) to figurative forms such as animals and humans, or items such as swords and Adinkra symbols.
Cast using the lost-wax technique ("cire perdue"). Akan/Asante brass-casters achieved works of great technical virtuosity by use of the lost wax process. A wax model was made and given several coats of a fine clay paste mixed with ground charcoal. A number of thin wax rods were attached to the wax model, which enabled holes to be formed through which the metal would be poured. After several coatings giving a thickness of between 3-6 mm had been applied, an outer layer of clay was carefully built-up around it and left until dry. The mould was heated and the molten wax tipped-out. A small clay cup containing the metal was sealed tightly against the hole leading to the inside of the mould. The mould and cup were then returned to the furnace and heated until the metal was molten. Tongs were used to quickly invert the mould so it was filled with the molten metal. The mould was then removed from the furnace and allowed to stand until it had cooled and the metal solidified. Lastly, it was broken open and the casting cleaned.
This data has been provided to the RRN by the MOA: University of British Columbia. We've used it to provide the information on the Data tab.
Silver coloured metal weight. Object is crescent shaped, very thin, with a bored hole along the convex edge. Edges are roughly cut.
Cast using the lost-wax technique ("cire perdue"). Akan/Asante brass-casters achieved works of great technical virtuosity by use of the lost wax process. A wax model was made and given several coats of a fine clay paste mixed with ground charcoal. A number of thin wax rods were attached to the wax model, which enabled holes to be formed through which the metal would be poured. After several coatings giving a thickness of between 3-6 mm had been applied, an outer layer of clay was carefully built-up around it and left until dry. The mould was heated and the molten wax tipped-out. A small clay cup containing the metal was sealed tightly against the hole leading to the inside of the mould. The mould and cup were then returned to the furnace and heated until the metal was molten. Tongs were used to quickly invert the mould so it was filled with the molten metal. The mould was then removed from the furnace and allowed to stand until it had cooled and the metal solidified. Lastly, it was broken open and the casting cleaned.
This object was not used as a gold weight; it was most likely created to be sold to tourists, and was made as a response to the legacy of weights. Its colour, style, and workmanship show its modern origins. Akan weights would not have such rough edges or rusted as this object has, as those who owned weights took pride in them, and desired them to have an aesthetic appeal. Gold weights were historically made and used by the Akan peoples to weigh powdered gold ('gold dust'), which was used as the standard currency from the seventeenth to mid-nineteenth centuries. Locally referred to as abrammuo (singular mrammuo), they were usually made of a brass alloy and were based on the Islamic weight system. Each form had a known measurement, and those engaging in trade at that time would own a full set of weights. The pieces were cast using the lost-wax technique, ranging in form from simple geometric designs (thought to be the earliest forms) to figurative forms such as animals and humans, or items such as swords and Adinkra symbols.
Let the RRN community answer your questions
With an account, you can ask other users a question about this item. Request an Account
Share your knowlege of this item with the RRN community
With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account