Brown wood shaft, black iron spearhead, and pointed butt. Base of the spearhead is flattened and hammered around the shaft attached with a nail. Iron butt hammered around the shaft. Sixteen notches cut into the shaft near the mid-section. Shaft has been cut through and re-joined.

Dark wood shaft cut and joined with a dowel. Narrow iron point with the tang inserted into the shaft bound with tightly coiled iron and two sections of loosely coiled iron. Band of incised geometric design near the point. Metal point flattened and hammered around shaft at butt.

Tipped with a sharpened black metal point hammered around the shaft. Butt end has black metal blade hammered and rounded. Blade joined to the shaft with nails. Shaft cut near centre and joined.

Small round gourd container (parts a), extensively incised with patterns burned with semi-circular design running along the top edge. Parallel lines run from collar to base with a circle detailed at the bottom. Gourd is pale orange with black markings. Circular, disc shaped, basketry lid (part b); small handle made of a thick piece of leather.

Knife (b) and sheath (a). The knife has a dark brown bone handle that fades to off-white where it joins the blade. The blade is sharpened on both sides and tapers to point. The sheath is laced together with sinew and has a loop at the top formed by a folded piece of leather.

Knife with hand made blade and hide sheath (part b). The knife blade is sharpened on both sides and has a carved bone and pewter handle that is drilled and riveted. Both the blade and handle are incised with an inscription. The sheath is laced with fibre.

Hollow reed (part b) with five holes bored through one end and three smaller holes bored at the other end. Wide plug (part a) fits in the hollow end while the other end is permanently sealed. Two arrows (parts c and d). While both arrows have a metal point tip and base with fibre ? or sinew ? wrapped around both ends and their shafts are notched at the end, one arrow (part d) has a smaller base with less material wrapped below it than the other arrow (part c). One arrow (part d) has some yellow plant leaf-like fibre attached at the base of the point.

Animal horn instrument. The horn is wrapped with leather at the base and carved with eight grooves at the tip. A hole is bored through to the centre from the outside midway between the leather and the tip.

Shallow, cylindrical tin can with a handle, a funnel for fuel and a wick stand soldered to the side and top edges. On the interior of the funnel has a fleur-de-lis imprinted with a silver triangular background outlined in yellow.

Mottled wood shaft cut through and joined near the mid-point. Dowel visible at the join which is inserted into both sections of the shaft. Leaf-shaped spearhead hammered around the shaft and secured with a nail. Pointed metal butt flattened at the shaft end and hammered around the shaft. Band of iron coiled around shaft below point.