Pounded metal blade is curved and has a stubby bone ? handle.

Triangular-shaped copper point. Blade inserted and riveted to antler shaft that has cancellous texture and a notch one quarter of way down its length. V-shaped cut where two antler sections have been joined and riveted with three copper pins. End tapers to point.

Triangular-shaped copper point inserted and riveted in antler shaft. Shaft has cancellous texture on one side and cortex texture on the other and tapers to point with two lines cut crosswise into antler.

Long, round bone segment, tapering at one end. Other end is oval-shaped with flat knob placed on angle. Cancellous textured areas on knob and back of handle. On bone, '25' written in blue ink.

Long, flat segment of bone with slight curve and one end rounded, with the other sharply flared outwards. Flared end has two deep grooves.

Trapezoid-shaped soapstone with slanted edges forming shallow trough.

Long, thin, carved stick that curves slightly. Small knot near the thicker end.

Stubby, carved piece of wood, thick at one end, thin at other. Thin end has ridge cut in around circumference for short piece of string tied on.

Leaf-shaped metal arrowhead with several notches out of its side and squared metal shaft inserted in wood shaft. Both are bound together with sinew. Shaft's end is cut in v-shape.

Wood is bent in circle with overlapping ends which are drilled, tied, and nailed. Short wooden handle with notch on one end is lashed to hoop with cord. Skin is stretched tightly over hoop and wrapped with cord which sits in groove. String piece tied near handle.