Copper scraper with a handle made out of a large piece of triangular-shaped, cut bone. At the wide end a curved piece of copper has been attached with copper nails, projecting from the bone to create the scraping edge. A rectangular shaped piece of copper is also attached by two nails at the midpoint on one side. A hole is bored through the bone at the end. Ridges can be seen in the bone from the construction process.

Ulu type knife with a triangular steel blade with a rounded bottom sharpened to a fine edge. The blade’s bottom corners are sharp and the sides are unequal in length and curvature. The blade is embedded into a slit in a cylindrical piece of smooth bone and glued in place.

Seal skin scraper. Steel blade is triangular in shape, with a curved bottom edge and uplifted corner points. The handle is a curved piece of bone with a protruding point near the distal end, flattening at the proximal where the blade meets the bone. The two are attached with a large metal nail.

Model harpoon made of wood and tusk. A long thin wooden piece (part a) is topped by a small cube of tusk embedded in the wood. The tusk is ‘T’ shaped, and has a shallow hollow carved into its top. Just below, two hide thongs enter and exit the wood through small bored holes. A small piece of tusk protrudes from the wooden shaft at the top centre of the object. The accompanying piece (part b) is a thin needle shaped piece of tusk, slightly curved, tapered at the tip, with two holes bored through the top.

Miniature carving of an oil lamp with wick (part b). The lamp’s bowl is shallow and flattened at the back. At the centre of the back of the bowl there is a row of red plastic bumps. The base has deep notches along all four sides. The wick is rounded at one end tapering down to a flat edge on the other. It is slightly curved near the middle.

Model stone Coppermine-style igloo on a stone base with a removable igloo top (part b), and a loose bone piece (part c) The base (part a) consists of the lower part of the house. It includes two seated figures in the main room and a child-sized figure playing with a dog in the mouth of the igloo. The three figures all have simple stylized features with long almond-shaped eyes, a triangular nose and an open oval mouth. All three are dressed in parkas. The house contains several miniature tools made of bone or wood. On the base outside the igloo is a small spear made of bone (part c) resting on a sled. There are two small copper posts which hold the igloo top in place on the base. The igloo consists of a dome connected to a short rounded tunnel. White etched lines on the exterior form a brick pattern.

Wooden carving of a man driving a sled led by a team of three dogs. A piece of black leather is wrapped through both hands and loops around the front dog’s lead. The three black dogs are adorned with harnesses of brown and tan hide and small pieces of wood. They are connected to the sled by very light tan strips of hide. All three dogs’ mouths have curled tails and dark red tongues protruding from their open mouths. The figure wears a parka with the hood pulled up around his face. He has simple features including a straight mouth and eyebrows, rounded eyes and a squared off nose. Directly in front of the driver is an open-topped box containing a miniature wooden hatchet (part c), shovel (part d) and machete (part e). A dark brown long gun (part b) rests across the top of the box. In front of the box there is a plump wooden seal (part f). It has two short fore flippers folded down over its chest. It has two small tail nestled between the two short hind flippers. On base: artist name and 'Eskimo Craft Charles Camsell Hospital Edmonton'.

Bronze cast of a partial female figure with a dark green-grey marble finish. The figure has wide flaring hips, a deep circular belly button and curves up to an asymmetrical one-breasted chest. Concave one the back with high ridges on the sides. Syllabic character(?) inscribed at back, near base, as well as the edition number 1/3.

Pair of wooden snow goggles with a hide strap. The goggles are short, wide and slightly curved. They have a rounded indent at the centre for the bridge of the nose. The slits are long and extremely narrow. The back of each of the eyes and the inside of the slits are painted back. The goggles have two holes on both right and left for the hide string, which is looped through and knotted on each side.

Dark brown wooden figure of a man playing a square drum. The face has simple, stylized features with a triangular nose and deep set almond shaped eyes. The faded black hair is parted down the centre of the head. The figure wears a parka with the hood worn down around the neck. He holds a thick wooden stick against the underside of the drum. The drummer is positioned at the back of the medium-brown base. "KA24" is written on the bottom of the base in pencil, along with a faded black stamp that reads "Eskimo Craft Charles Camsell Hospital Edmonton".