Small scraper-like tool with a wide blade of thin curved metal. The blade wraps partially around a handle of wood and is attached to it by nails. The front of the blade flares slightly up and out. The handle is short and thick with a curved and thicker butt end. A long crack in one side of the wood has been repaired by a nail.

Small blade attached to an antler haft. The blade is leaf shaped, with a wide shoulder that tapers to a point. It is inserted two centimetres down into the haft and secured there by a metal nail. The haft is pointed at top with rounded shoulders and a cleaved base. On the ventral side a large hole is bored horizontally through at the centre point and a hollow has been dug out at the base above the cleaved bottom.

Small knife. The metal blade has a sharpened cutting edge and point and a thick spine. It is attached to a wooden handle with wrapped sinew, adhesive and a nail. The handle is long with a curved butt.

Small carving of a sled dog, with a hide harness. The animal stands with head low and tail extended straight, in a wide stance. The head is squared, with delicately carved ears and painted eyes and mouth. The harness surrounds the dog’s shoulders and neck and trails down the back toward the tail.

Cable-backed, double recurve bow, made of musk ox horn. The main body of the bow is a long thick slab of horn, with copper rivets holding it together at its joins. Behind the horn is a layer of dark brown hide or skin running the full length. Each end of the horn bow has a knob projecting up and down, around which many strips of hide lashings have been wrapped from end to end. The lengthwise lashings are wrapped widthwise by other hide lashings and then the full thickness of the bow is wrapped near each end and in the middle. The bow string is looped around each end knob, and hangs loosely.

Shaft of an arrow with no fletchings. The nock end has two opposing diagonal cuts that come toward each other to form a blunt end. The other end has both a hole and a slit cut into it lengthwise into it to facilitate hafting the shaft to an arrowead. There is sinew wrapped around both ends.

Footed arrow consisting of a wooden and antler shaft, a copper arrowhead, and no fletchings. Its nock end is oblong and has about a centimeter of wrapped sinew on the shaft above it. The other end has a both a hole and a slit cut into it lengthwise to facilitate the hafting of the antler component. It is also wrapped with sinew. There is a depression near the nock end where fletchings would have previously been attached. The antler component is inserted into the hole of the wooden part and is attached to the arrowhead by a socketed tang. The arrowhead is almost pentagonal in shape.

Small replica knife carved entirely out of tusk. A thinly carved blade, somewhat translucent, makes up the larger portion of the object, with one side sharpened to a fine edge and the other blunt. The handle is shorter than the blade, with carved finger hollows on one side. The scratches of construction can be seen overall.

Toy, called an ajajaq, made out of what may be petrified wood? The object has a long, thin, rounded neck sitting upon a wider mid-area with a single, thick 'shoulder.' The mid-area narrows toward a flaring base. Many small holes have been bored through each of the object’s surfaces at regular intervals. A long, thin piece of sinew is tied through two of the holes in the centre back of the object and hangs loosely.

Small, spoon-shaped tool. The flat 'blade' and shaft are made of folded metal. The metal end is long and shaped like a drop, with a pointed tip. The handle of the piece is wood, broken with a portion missing, connected to the metal by sinew wrapping.