Triple whistle made of three single whistle parts of equal length which are now rebound as two separate pieces (parts a-b). Part a consists of two parts bound together with cord; part b is the third matching part from the other side, which is now detached. The outer pieces are rectangular in cross section while the middle piece is square in cross section. All three pieces are bound with cord near their outer ends and middle. Upper portions of each whistle are painted blue, as is the binding at that end. The middle and left side pieces (part a) are bound together at their tapered ends with white cord. The right side piece (part b) shows past evidence (indented cord marks) of being bound at the end. While the wider end is solid on each piece, there are hollowed areas through each tapered end, through to the cut out rectangular holes.

Rectangular bentwood box with lid (part b). There are Northwest Coast designs painted on the chest panels, but only traces of the imagery are visible beneath the overall darkened surface. Lid is unpainted.

Headdress with frontlet. Frontlet depicts eagle with killer whale above and human-like face below. Painted black around eyes and beak, blue around mouth, red on forehead, side of face, mouth, and claws. Mirrors inset for bird eyes. Frontlet is inlaid with abalone shell pieces around three edges, with an extra, smaller, row on sides. Shell pieces are tied on. Ermine pelts, some with red cloth tied to them, drape down at the sides and back. Only a few sea lion whiskers still extend at top.

Large, carved, wooden, hokhokw mask with a long beak and circular cutout nostrils. The beak is hinged with pieces of leather nailed to either side. The beak is painted black with a red mouth and nose. Along the front end of the beak are ten, white, incised U-forms. At the back of the nose are two large black and red U-forms followed by smaller red and white split U’s outlined in black. The eyes are white, outlined in black and red, on a white, ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top and side edges of the mask are lined with braided cedar. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. Intertwined in the cedar are a few feathers. The bottom has crooked beak depicted with black and white eyes, red and white mouth and a protruding, crooked beak. The mask is painted black, red, and white with Northwest Coast stylized designs.

Carved, wooden, raven-kolus transformation mask. The exterior raven consists of a long black beak, red mouth and cutout nostrils. The eyes are white, outlined in black on a white background surrounded by a green ovoid; brow is black. The mask opens in four directions – to the sides, up and down – exposing kolus with a short white beak, red mouth and nostrils. The eyes are white, outlined in black on a white background surrounded by a green ovoid; brow is black. The side boards depict its wings; top its tail feathers while the bottom open board is detailed with ovoids, U’s and split U’s. Twine cord attaches to all four sides to assist the mask in opening and shutting. The opened boards are hinged with leather and attached by nails. The mask is painted white, black, green and red with Northwest Coast stylized designs. Long strips of cedar hang down the back covering the head of the wearer.

Large, carved, wooden, raven hamatsa mask with a long beak and an ovoid shaped protrusion for a nose. The beak is hinged with pieces of rubber nailed to either side. The beak is painted black with a red mouth and cutout nostrils. Around the mouth are red U-forms. Along the ridge of the beak are red U-forms on a white background. The protruding eyes are white, outlined in black on a red background; brow is black. Above the brow are two ear-like structures with red painted U-forms. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top has long strips of cedar that hang over the wearer. Intermixed in the fridge are black, raven ? feathers. The mask is painted black, red, and white with Northwest Coast stylized designs.

Large, carved, wooden, raven hamatsa mask with a long, wide beak and large protrusion for a nose. The beak is hinged with pieces of leather nailed to either side. The beak is painted black with a red mouth and cutout nostrils. Around the nose are white, red and black U-forms. The eyes are white, outlined in black on a white, ovoid shaped background; brow is black and white with black spots. The inside of the mask is hollow with the exception of piece of cedar twine used to open and close the beak. The top of the head has a slight triangular shape. Pieces of cedar used to be attached along the top ridge of the beak. The underside of the mouth is painted black with a white stripe running down the middle and a circular design left unpainted. The mask is painted black, red, and white with Northwest Coast stylized designs.

Mask with protruding nose and open mouth with thin lips. The mask is painted white with and undulating black and red design at the top of the head, heavy black eyebrows, black around the eyes, a red nose tip, a black moustache with upturned and pointed ends, red lips, and three red semi-circular shapes on both sides of the face. Cord attached on reverse through holes in the sides and top of the mask.

Pentagonal wooden frontlet featuring a carved eagle in high relief; painted sisiutl design around the edges. Painted blue, black, red, yellow, and green. Bird and sisyuth representation.

Mask composed from two pieces of wood nailed together at an angle and painted white with black hair, black eyebrows, circular eye holes outlined with an eye shape in black lines, a orange-red-tipped nose, orange-red lips, and three red crescent shapes either side of the nose. A horizontal groove is cut into the chin.