Wooden cradle, or baby carrier, in three pieces. Part (a) is the bottom and the side, (b) is the other side, and (c) is the bottom end. The main part is loosely held together with nails; the other two parts have nails protruding along the side (part b) or bottom (part c).

Humanoid face mask. Oval shaped mask with wide pronounced red lips, red nostrils, circular black eyes on a green background, and black gill shapes around the mouth. The bottom half of the face has a white background as does the area above the eyebrows.

Carved wooden, crooked beak headdress, or mask. The beak has large red, triangular shaped nostrils outlined with a black and white s-form. Running from the brow is a small central black frill that protrudes outward and curves inward to the centre tip of the beak and back into itself; decorated with white semi-circles. The mouth is red, flat and protruding. The bottom parts of the beaks are hinged with rectangular pieces of leather. The face is black with white detailing. The eyes are black and large, outlined in white and red on a white ovoid shaped ground; brow is black. The underside of the beak is black. The inside of the mask is hollow with the exception of a piece of fibre twine that helped articulate the beak. Attached to the top edge is a twist rope of red and white fabric. The top has many bundles of small stripes of cedar bark. Hanging from the back and bottom edges are long strips of cedar that would cover the wearer. The mask is painted black, white and red with Northwest Coast stylized forms.

Kulus mask (younger brother of Thunderbird). Mask has a curved upper and lower beak; the lower part of the beak is movable. Two plywood horns with curled ends attached at top of head. White feathers inserted into top of head. Blue beak with red nostrils, black eyebrows, and black, red and white horns.

Wooden, carved, raven mask with a long beak and S-shaped cutout nostrils. The beak is hinged with pieces of skin on either side, nailed to the lower mouth. The beak and nostrils are painted black with white and red edging. The eye is outlined in black and red on a white background. The eyebrow is black with white and red U-shapes repeated above. The top of the head is decorated with cedar bark fringe and black feathers. Long strips of cedar run down the back and bottom of the mask. The inside of the mask is hollow with a wooden T-form at the back.

Brown wood rattle consisting of two rounded pieces put together, each with a semi-cylindrical handle, creating a full rounded oval rattle. Handle is bound with metal wire. Rattle is in the form of a killer whale which curves all the way around with the tail meeting the small blow hole on top with the human figure attached to it. Black eyes in white oval in green oval with extended curving red line around and black and white u forms above. Black body is decorated with white in red circles that have abalone shell inlay at their centres. Side fins have a central abalone shell inlay surrounded by a green ovoid with a red split u at the end. Vertically black dashed tail is outlined by black and bordered by white. Human figure is red with a green area surrounded the black eyes. Cedar bark decorating the end of the tail and the human.

Brown double whistle that is rectangular in cross section and comes to a tapering end and is bound in two sections with green and brown twine, one near the wider end and one near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut rectangular hole nearby at either side. There is the number '3' carved above one hole.

Light brown and brown double whistle that is irregular in cross section due to warping and appearing not to fit properly while it is made of different kinds of wood. Comes to a tapering end and is bound in six sections with brown twine that are relatively equally spaced. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut natural triangular hole nearby on one side with two taper cut semi-oval holes at opposite corners on the other side.

Brown double reed whistle that is square in cross section and bound in four sections with brown string, two near each end and two near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut semi-oval hole that bulges outward nearby at either side.

Brown double reed whistle that is rectangular in cross section and comes to a tapering end and is bound in beige twine in two sections, one near each end. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut round cornered rectangular hole nearby at either side with a smaller taper cut semi-oval hole at the opposite end. Made from cedar wood.