Bottle-like woven trap with inverted lid attached. Walls bulge out from oval base and compress into flat oval shoulder. Twined, circular neck flares slightly outwards. Inverted cone lid attached with one strand. Alternating sections of medium flat woven weft and narrow rounded twined weft. Natural light brown colour. Loose weaving to allow water in.

Tall, square-bottomed, jar-like basket. Rigid structure, square at the bottom with tall rectangular shaped body. Shoulders slope inwards to cylindrical neck which extends upwards approximately. 8 cm. Body is composed of vertical slats placed in parallel order around the structure. Slats measure 1.5 cm. in width and are placed approximately. 0.3 cm. apart. Slats are twined together at base, center and shoulders of body. They taper at shoulders and continue to lip of neck. Lip is finished with a herring bone stitch called 'iyugu'. Base is supported with rattan foot ring.

Wide, round, square-based basket with bamboo rim and foot. The rim is attached with lashed and knotted fibre; foot is pierced at intervals with fibre lashings. Exterior has linear geometric patterns in black-brown and natural; bottom has a pattern of alternating black-brown and natural concentric squares.

Wide, round, square-based basket with bamboo rim and foot. The rim is attached with lashed and knotted fibre; foot is pierced at intervals with fibre lashings. Exterior has linear geometric patterns in black-brown and natural; bottom has a pattern of alternating black-brown and natural concentric squares.

Light-coloured, cone-shaped palm hat with a small conical, dark brown wood point on top. Exterior has a geometric design of three equally spaced vertical bands that consist of a dark brown diamond pattern. Interior has a rattan headband. Chinstrap is orange and white cotton with a tassel at the end.

Semi-spherical hat plaited over a supporting frame of sewn palm leaves. Outer rim is of coloured split bamboo. The exterior has a geometric design that consists of four panels that each have a central three side-by-side dark and light brown diamond shape pattern to create a light brown w-line with a checker-like pattern above and a light brown zig zag line with a varied pattern below. The inner surface of palm is plaited in an open pattern. Pith knob on top of the hat is in the form of an irregular cylinder. A chain of braided bamboo is attached to opposite sides of the rim.

Elongated, light-coloured, cone-shaped palm hat with a conical, dark wood knob on top. Exterior has three plaited geometric parallel designs that consist of a dark brown diamond pattern, one at either side and one along the middle of the shorter end. Interior has a herring bone pattern. Rim and headband are twined and strengthened with rattan. Headband and chinstrap inside. Chinstrap is twined orange and white cotton with a tassel at the end.

Semi-spherical hat with a small turned-up stiffened brim made of palm, topped with a tapering, cylindrical knob of wood. The exterior has a geometric plaited design that consists of four panels that each have a large, dark brown diamond shape that has five smaller, light brown diamond shapes within, one at each corner and one at the centre. The interior has a separate woven lining of palm in a knot stitch. Braided palm link chain attached to one side of the brim.

Cylindrical basket with a square base. Plaited geometric design on the exterior. The bands are of a natural colour with designs in dark brown that include the following from top to bottom: fragmented tilted squares, solid tilted squares, fragmented tilted squares, fragmented tilted squares, solid tilted squares, and fragmented tilted squares. Rim sewn with bamboo or palm fibres.

Cylindrical bamboo tube in two parts: top (part b) slides into the bottom (part a), not an accurate fit. The cylinder tapers towards both ends, each of which has a concave depression. A plaited loop is inserted in the centre of the top (part b) and is knotted on the interior. The design and the foot and the rim have been painted black. Geometric designs are incised on the sides. The bottom (part a) has three horizontal bands with the following patterns from top to bottom: four-lined inward pointing triangles to create a zig zag in between; inward pointing triangles that have horizontal lines within and that create a zig zags in between; and diamond shapes. The top (part b) has vertical bands of x-shapes, zig zags, and diagonal lines.