Pair of plain, round, tin metal earrings with metal hoops attached at tops and covered with material. Part a has leather covering the hoop, and part b has brown-yellow rubber covering the hoop. The small groove in each earring is filled with dirt in some areas.

Long tubular drinking straw made of faded yellow and red-brown coiled vegetable fibre. One end has a woven strainer and the other has a mouth piece that curves to one side. Paper sticker on the side of the tube near the strainer.

Drum made of wood covered in animal skin with short, mottled off-white and brown hair. Overall drum shape is cylindrical at top half, and tapering towards base on bottom half. One piece of skin stretched over bottom and up sides with a scalloped edge is joined to a circular piece of skin stretched over the top of the drum by wound strips of skin that have been pulled through holes at the edges of both pieces of skin. (Pink synthetic ribbon attached to one of two handles at top edge.)

Tool with bill-hooked (nearly S-shaped) iron blade with a long, four-sided shaft, a cylindrical wooden handle that flares slightly at the butt end, and a strip of flattened wire wound around the top of the handle.

A tall thin curved hide shield with each of the four corners curving outward. The handle is a long stick down the middle which is looped at the centre. Hide binds parts of the handle to the shield. There is a ball of dark feathers (part b) that is said to go with the shield.

Rattle has a long stick handle, with a woven globular-shaped basket on one end. The basketry ball has metal(?) pieces inside that rattle.

Part a is a long hollow metal spear with a lance-olate shaped tip end. Part b is the long hollow metal point. The two pieces do not fit together as is; they appear to be missing a wooden piece that would join them together.

Part a: a long, tapering metal spearhead with a broad, leaf-shaped tip. Part b: a long, conical metal spearhead that tapers to a point. Both parts a and b are fitted onto short lengths of wood with pointed ends with a metal bolt driven through the wooden shafts. The ends can be rotated to a shorter length, side by side, or rotated out to be over 2 m long, joined at the middle. (The 2 pieces do not currently come apart.)

Cylindrical lip plug. Smooth and slightly curved with one ridged, rounded edge.

Cattle bell made from a small whole tortoise shell that has two wooden clappers attached with rawhide thongs through two holes in the upper shell. Twelve complete geometric shape blocks on the top shell with an entire bottom shell as well. Geometric shape blocks have orange-brown middles and are black on the outside with contour lines.