Wooden crossbow (a) with a twined, fibrous cord (b). Bamboo crosspiece, tapering out from centre has carved dowell-shaped ends. Piece is centred passes through and at right angle to stock. Stock tapers at front end to two points and tapers from join leveling out towards butt end. Two notched rows along length of front end with remains of fur overall, added by gluing(?). Carved notch halfway down stock and dowell ends of crosspiece accommodate. Part b: length of twisted and bound fibre; two loops at each end for fitting over dowels; centre of length is reinforced with twisted bamboo for fitting into notch. Carved, articulated wooden trigger attached by dowel to stock.

A hand-built ceramic with a central cylindrical spout surmounted by a ring handle. Vessel form may be a stylized rodent. Surface colour is predominantly orange with traces of fugitive negative decoration. Residue of white and orange may be slip decoration. Facial features, including eyebrows and nose, are modelled and incised. Vessel is thick walled and paste is coarse; patches of clouded grey from incomplete firing. Many cracks and breaks, reassembled with glue.

An effigy vessel in the form of a seated female with genitalia rendered in detail. A coarse-paste, thick walled ceramic that is oxidation fired with red slip and negative black decoration on face and body. Right hand is cupped over right breast; left hand and arm is missing. One bi-coloured ear-spool and, possibly a labret are now detached. Cylindrical spout and strap handle are roughly mended as well as vessel bottom.

A black stirrup spout vessel in the form of a prawn or lobster with overlapping skeletal plates along its back, a pair of front clawed appendages and five pairs of lateral ones. A small monkey is attached at the base of the spout. A lengthwise seam joining the two symmetrical halves of the pot is clearly visible on the inside through breaks in the stirrup-spout. The stirrup is broken off the vessel and part of the spout is missing. Some gluing and restoration materials are in evidence.

Composed of a length of bone inserted into sinew bound hollow wood sleeve and glued. It is tapered at both ends.

Composed of natural bone inserted and glued into a sinew-bound hollow wood sleeve. The length of bone tapers at both ends, and is darker at the exposed end.

Double-barbed metal point (part a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.

Double-barbed metal point (part a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.

Double-barbed metal point (part a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.

Double-barbed metal point (a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.