Curved antler handle. Long hide thong strung through holes drilled into each end. Top edge is scalloped, for finger grip. Front has been polished; back is rough, showing core of antler.

Model fish spear made of antler, consisting of the head and shaft (spear originally one piece, has broken in half). Head (part a) is trident-shaped, with two antler prongs on either side of the shaft tip. All are riveted together. Curved screws inserted into ends of prongs, facing inward, forming hooks. Pointed barb screwed into top of shaft tip. Long shaft (part b) fits into bottom of spear head, between ends of antler prongs. Hole drilled through bottom edge with a white cotton tie looped through, for attachment or hanging purposes.

Model kayak made of skin, stretched over an internal wooden structure (part a). Strip of antler(?), secured with wooden pegs, lines front keel. Ends of kayak are capped with oval-shaped pieces of ivory(?). Two sinew rigging lines in front of the high-walled cockpit, and one behind. Two ivory fasteners attached to each line. A double-bladed paddle (part b), spear (part c), harpoon (part d), harpoon line rest (part e), and two tools (parts f and g) are separate. The paddle, spear, harpoon and harpoon line rest are made of wood with antler blades (parts c and d) and reinforcement components (parts b, c and e). The two tools are made of antler. The largest (part f) is flat with a straight handle and a curved tapering end. The smallest tool (part g) has a rectangular handle, with triangular indentations along the bottom edge, and a thin pointed tip.

Long, thin scoop-like ladle made of antler. Shallow bowl has steep sides and curved ends. Handle is rectangular and angles upward. Two holes drilled through centre of handle with strip of hide looped through, forming a hanging tie. Bowl and back of handle have been polished; front of handle is rough, showing core of antler. Previous repair work below hide tie. Small metal plate has been riveted to front, covering a large crack visible from the back.

Model kayak carved from antler (part a). Small figure (part b) sits inside cockpit, wearing a hooded parka. Eyes and mouth are incised, nose carved in low relief. Arms are held straight in front of body. Small notches along centre edges of hands to hold a separate double-bladed paddle (parts c and d; paddle is broken). Back of figure is polished; front is rough and dark grey, showing core of antler. In front of the figure, two harpoons are tied to the kayak with white fibre. Animal-shaped harpoon rest, with holes drilled along its length, in between them. Ends of kayak are carved in low relief.

Carved stone caribou (part a) kneeling on all fours, with legs tucked underneath the large body. The caribou is facing forward with rounded ears back, eyes squinting, and mouth slightly open. Both antlers (parts b-c) have been broken off above their attachment points.