Walrus skull. Covered in art.

Brown coloured, circular nose ring cut at the top centre to allow insertion onto the nose. The piece flares and thickens slightly toward the centre bottom. The surface is a mottled brown, covered in thin dark brown cracks.

Small bone comb tied to a rawhide needle pouch with a strip of hide through the carved hole (part a). The pouch has slots containing four bone sewing needles (parts b-e).

Dog whip made with a caribou lower leg and hoof attached at one end. The leg fits into a tightly sewn hide piece with a fringe cut around it, which is attached to a long thick cord. At the other end of the cord, twined and knotted strips of hide have been attached.

Quiver with two compartments formed from ground squirrel skins. The compartments are sewn together along their long edges by strips of rawhide. A strap of rawhide with toggles of hoof(?) comes from the bottom of the quiver and would likely have attached to a small strip of rawhide that is attached at the top. An antler handle is attached to centre of long edge of the larger compartment.

Footed arrow consisting of a wood and antler shaft and a steel arrowhead. The wooden part of the shaft has fletchings of two dark feathers held on at both ends by tightly wrapped sinew. Its nock end is oblong. The other end has a both a hole and a slit cut into it lengthwise to facilitate the hafting of the antler component. It is also wrapped with sinew. The antler component is inserted into the hole of the wooden part and is attached to the arrowhead by a socketed tang. It has barbs carved into the two sides that oppose the edges of the arrowhead.

Footed arrow consisting of a wooden and antler shaft and a steel arrowhead. The wooden part of the shaft has fletchings of twowhite feathers held on by tightly wrapped sinew. Its nock end is oblong and has about a centimeter of wrapped sinew on the shaft above it. The other end has a both a hole and a slit cut into it lengthwise to facilitate the hafting of the antler component. It is also wrapped with sinew. The antler component is inserted into the hole of the wooden part and is attached to the arrowhead by a socketed tang. It has barbs carved into the two sides that complement the edges of the arrowhead. The arrowhead is almost pentagonal in shape.

Footed arrow consisting of a wooden shaft (part a) and an antler shaft attached to a steel arrowhead (part b). The wooden shaft has fletchings of two dark feathers held on by tightly wrapped sinew. Its nock end is oblong and has about a centimeter of wrapped sinew on the shaft above it. The other end has a diagonal cut out of it that forms a point to which the antler can be hafted. It is also wrapped with sinew. The antler shaft has a complementary diagonal cut to the wooden shaft and is attached to the arrowhead by a socketed tang. The arrowhead is almost pentagonal in shape and the edges adjacent to the tip are beveled sharp.

Small blade attached to an antler haft. The blade is leaf shaped, with a wide shoulder that tapers to a point. It is inserted two centimetres down into the haft and secured there by a metal nail. The haft is pointed at top with rounded shoulders and a cleaved base. On the ventral side a large hole is bored horizontally through at the centre point and a hollow has been dug out at the base above the cleaved bottom.