Long spear with carved bone head. The edges of the head have four barbs each, staggered, along the sides. Head is bound to a narrow wooden shaft with string and wax. The convex side has remnants of a light green dye over the middle half of the head. The wooden shaft is carved into diagonal patterns filled with lime. It is inserted into a slightly larger bamboo shaft and bound with rattan and wax. The shaft has been thinly shaved towards the join and a few thin lines have been scratched around the shaft just below this. The nodules have been shaved smooth.

Pig bone nose ornament, noticeably wider at one end. A broad ring has been carved at centre, with long arches on both sides of the bone, forming ends that appear as crescents from the front or as arrow points from a top view. The bone has been polished.

Pig bone nose ornament, slightly curving, noticeably wider at one end. A column of over three centimetres in length has been carved at centre with crescents at its ends on opposite sides. These in turn form ends that appear as crescents from the front or as arrow points from a top view.

Pig bone nose ornament. The bone has been carved to leave a central ring. On both sides two thin arms sprout on opposite sides of the ring for a couple of centimetres, culminating in molar-like shapes with four spikes.

Pig bone nose ornament, slightly curved, noticeably wider at one end. A central column of over two centimetres in length has been carved, and at its ends are long arches on opposite sides. These in turn form ends that appear as crescents from the front or as arrow points from a top view.

Three bent wood hooks with bone barbs lashed on with bark. The hooks have the remains of sinew leaders on the lower arm. A) B) are halibut hooks, C) is a cod hook.; Good.

Model kayak. Thin pieces of bent wood tied together with sinew make a rigid interior frame that is covered with a single piece of stretched hide, sewn together along the top of the kayak. Two harpoons (?) with wood handles attached by sinew to bone heads are held to the model in front of the cockpit, strapped in place by two thin, horizontal deck lines of hide. A carved piece of bone is positioned directly in front of the cockpit. Two holes have been bored through its base, which hold the deck lines in place.

Arrow with a long wooden shaft, tapering slightly and reddening toward the nock. Fletching is attached to shaft with a wrapped thread at feather tops and sinew at bottoms. At the tip, the point head (part b) is cast in copper with several serrations along the barbs, and a long, thin bone base sunk into the shaft and secured with wrapped sinew and string.

Arrow with long wooden shaft (part a), tapering slightly and reddening toward nock. Fletching is attached to shaft with wrapped thread at feather tops and sinew at bottoms. At opposite end, a long, thin bone shaft (part b) is sunk into the wood and secured with wrapped sinew. The point head sits in a notch in the bone, and is cast in copper with serrations along the barb bottoms.

Arrow with a long wooden shaft (part a), tapering slightly and reddening toward nock. Fletching is attached to shaft with wrapped thread and sinew at feather tops and sinew at bottoms. At the opposite end a long, thin bone shaft (part b) with notching along its length is sunk into the wood and secured with wrapped sinew. The point head is cast in copper with serrations along the barb bottoms and is nailed to the bone.