The shaft is carved with dark vertically linear designs on a natural background above four of the five cane joints with the top most design consisting of triangles. The end of the shaft is wrapped with fibre. The base of the shaft, near the pointed end, has bark (?) wrapped around it. The point has two stacked cones, each with a double base.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood. The top edge is slanted at an angle. Evenly spaced rectangular carved sections are located on the edge of the piece near the top and have embedded cedar bark stitching. Back has two rectangular indented notches at the bottom and top of the board. Nails on the top portion of the board.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs visibly cover the entire surface. Cedar bark stitching and/or the attendant holes at both ends of board. Nail holes irregularly spaced around the outer edges. Underside is covered in uniform chisel marks, with an encircled number ten inscribed in bright pink near one end. Rectangular indentations at both ends on the underside.

A basketry woven fan with a deltoid leaf shape. The main geometric design consists of a double pair of curved dark brown bark rows, one from the inside and the other along the outside, going from the bottom of one side to the top of the other side. Light brown bark background.

A long rectangular cedar plank with faded black and dark red Northwest Coast designs imprinted in the surface of the wood. Rectangular incision near the top and bottom of the plank that has cedar bark stitching embedded in it. Rectangular indentation on the back near the bottom and top of the board.

A long rectangular cedar plank with deep red and black faded Northwest Coast designs imprinted in the surface of the wood. Bottom edge is slanted. Rectangular indentation on the back of the plank at either end. Two rectangular carved sections at the top and bottom of the piece inset with cedar bark. Two indented notches at the top and the bottom of the piece on the back.

A rectangular coiled imprecated basket made from cedar wood sewn with split cedar root. Rectangular design formed by cherry bark.

Rectangular burden basket that tapers slightly towards the bottom. Basket has three skin loops and five skin ties. On the front, there are three imprecated diamond designs. On the ends, there are two imprecated diamond designs. On the back, there are three vertical imprecated vertical designs.

Rectangular-shaped burden basket that tapers slightly towards the bottom. Basket has a thick white cotton fibre strap that is secured to the basket with skin cording. Cotton strap ties into a knot on one side of the basket. A reddish-black band of cedar bark stitching decorates the middle of the basket.

Small oblong-shaped doll carrier, or cradle, with plastic doll wrapped up in strips of cedar bark. Cradle has arched handle attached to one side. Skin strips attach to handle and opposite end of the cradle. Cradle is decorated with alternating sections of diagonally stitched white cedar root and cherry bark around its perimeter. The lower portion of the cradle has evenly spaced checkered sections of white cedar root and cherry bark.