Carved, oval,wooden bowl with curved, raised ends. Metal tack in each end. Base has two rectangular pieces of metal hammered in, which cover gooves carved into short ends of base.

Scissors with long blades. The handles have a cut-out design and round finger holes with a metal diamond shaped point on the top of each.

Model totem pole. From bottom, seated figure holding knees, then a horizontal whale with its tale flukes carved into two bird heads, then a thunderbird with wings outstretched and head turned facing opposite direction of whale. Whale appears fitted in place. Thunderbird's wings screwed onto back. Small painting of a whale on front of base. Pole is nailed to base.

Brass turtle; hollow. Hole punched in nose. Engraved pattern on back. On centre of back two cartouches, one with maker's mark and the other with company's mark.

Hollow brass turtle; hole at top; cartouche on body with maker's mark; further cartouche below with unclear mark; tarnished.

Round, square hole in centre, inner and outer rims on both sides, 4 characters on obverse, 2 characters on reverse. Daoguang dongbao (top-bottom-right-left) in Chinese characters on obverse. Reverse has boo yuwan (mintmark) left-right, dot top.

Chair hardware consisting of three box-shaped pieces (c-e) with rectangular holes through the two largest faces; one of these pieces is missing one large face. Three other pieces are metal rings with rectangular protrusions that swivel around ring (f-h); each protrusion has a small rectangular cutout at its end. Last three pieces (i-k) are small pin-like pieces, one of which has a round, domed head. These pieces attach to two wide "v" shaped legs (N2.1102 a-b).

Long sword with elephant ivory(?) handle that curves at the top and flares to a squared-edge on one side. Attached to ivory handle is a five-ridged cylindrical metal piece that attaches to the inner knife blade (part a). The sheath or blade covering (part b) is wooden, dark-brown, has three bands of metal evenly spaced on the outside, and has a wide and upturned opening where the blade is inserted.

Round metal anklet with cut-out oval-shaped scalloped outer edge and braided inner edge.

Long piece of metal that has been bent into a spiral-shaped ring. Has nine rungs with small linear grooves on the rounded edge.