Bee mask. Rounded forehead has split U forms, yellow with black splits at sides, partially covered by cedar bark, vertical series at centre has black and red- brown with white and a solid black U; curved thick black brows with ends curling towards side rims; white temples with black and red U forms; small orbital area, base of protruding circular hollow eyes and base of snout between eyes are yellow; black and white bands around top of eyes; bulbous protruding snout has black triangular design at top and bottom joined by a narrow band, cluster of five drilled holes, four with remains of 'stingers'; white, yellow and red crescentic bands around hollow circular nostrils; defining line on cheek melds with orbital ridge; white cheeks have crescentic black line varying in thickness; series of twelve U forms along mouth ridge, white and yellow lines around red lip band, rounded upper lip and pointed lower lip; yellow triangular upturned chin. Cut cedar bark, tied with white cord and folded around a folded piece of orange-pink cloth that is nailed to the upper rim; brown cord is loosely twined into cedar bark 2/3 from top rim. On reverse, a single green cord is passed through two holes at upper rim, looped and knotted through a hole at each temple; white cord binds green cord at upper rim; hole in bottom centre of chin.

Large, carved, wooden, raven hamatsa mask with a long beak and an ovoid shaped ridge for a nose. The beak is hinged with pieces of rubber nailed to either side. The beak is painted black with a red mouth and circular cutout nostrils. At the back of the mouth are two s-shapes. Around the nose is a red ovoid and U-forms. The eyes are white, outlined in black on a white, ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak along with a fibre head ring. The top, side and bottom edges of the mask are lined with braided cedar. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. The underside of the mouth is painted black with a small white design. The mask is painted black, red, and white with Northwest Coast stylized designs.

Rectangular bentwood box with dark brown patina. Painted bird design in red and black on front panel. On opposite side are a series of vertical and slightly diagonal white lines.

Wooden paddle, painted and varnished on both sides. Design shows pencil marks, handle is red with small design of red and black bands. Lower section painted in red, black and blue. Blade is relatively flat with curved edges and tip, and handle is cylindrical near the centre of the paddle, but flattens towards the cylindrical handle grip.

Carved skull with hollowed eyes, now plugged. There are red circles around eyes, cheeks, nostrils and teeth. There is a black beard, a hole through the top of the head with a cord of fibrous material. Inscription written on back.

Carved skull with black hair, eyebrows and cheeks, red nostrils and teeth. Eyes are almost hollowed out, there are holes in both, and there is a hole at the top of the head.

Wooden skull with nearly hollow eyes, two holes in eyes and two holes at sides of temples, hole at top of head which goes through to the back; black hair, eyebrows, and sides, red cheeks, nostrils, and teeth.

Skull with red painted hair, black eyebrows, red cheeks, nose and mouth. There are three black teeth and two plain. The eyes are completely hollow. There is a hole through the top of the head, to back. The following is written on the back: "10.00."

Wooden wolf headdress, or mask, with a long rounded snout, painted mainly in a black and white design, however the inner eyes, nostrils and lips are painted red and the area surrounding the eyes is painted green. Outside two leather straps are nailed underneath the lower portion of the mouth, acting as hinges. Inside two ropes are strung to adjust and open the lower portion of the mouth. There are two upright ears nailed to the top of the head. A black cloth is nailed to the back of the mask and the extra cloth is tucked inside.

A long rectangular board made of dark brown-coloured cedar in an openwork design tapering from the widest end. Perforations with coloured, bevelled edges are spaced down the board's length. Yellow-brown openings are three pairs of varying sized elongated ovals, and two ovals, each with a flaring extended triangle shape out one side. These two are arranged lengthwise on the board between pairs of ovals. Last element is recessed red ovoid with perforated eye with dark brown pupil in centre. Shining, transparent flakes scattered randomly over board's surface, some of which are loose. Shining transparent flakes scattered randomly over board's surface, some of which are loose. Looped through to the back at the corners are pairs of wires. One pair holds on a short carved wood tube while another pair at the other end holds on a short carved wooden stick.