AMEC Analysis:Part: WholeYears (min): 1850Years (max): 1920Neck Finish: Lipping ToolOne clear glass, round bottle with wide patent finish. Seams indicate post-bottom manufacture. Dried yellow and black substances on interior. L. Penttila 3/15/2010

AMEC Analysis: Part: Whole Bottle Type: Condiment Neck Finish: Lipping Tool Comments: This is a pickle bottle with "H" and "530" embossed on the base. Seven fragments of one clear glass food bottle with polygon base and wide patent finish. Faceted body up to shoulder. Wide patent finish indicative of bottles holding condiments, oils or other food. Side mold seams extend beyond faceting to mid-neck. Largest fragment labeled 45KI765/M-43a, second largest fragment labeled 45KI765/M-43b, third largest fragment labeled 45KI765/M-43c, fourth fragment labeled 45KI765/M-43d, three smallest fragments bagged together and labeled 45KI765/M-43e. Base has embossed Maker's Mark: 630 H Dried substance on interior and exterior surfaces. J. Dougherty 03/22/2010 Bottle broken into two large pieces and two small pieces in between photography and cataloging at the Burke Museum. There were significant cracks in the bottle which likely caused breakage during movement of the box containing the complete bottle. K. Meyers 06/16/2010

AMEC Analysis: Part: Whole Neck Finish: Automatic Machine Decoration: Embossed Color: Aqua One clear glass condiment bottle with blake base and flat or patent finish. Vertical indentations on shoulder. Makers mark embossed on both short sides. One side reads: "H.J. HEINZ CO." Opposite side reads: "PITTSBURGH, PA" Dried substance inside and outside of bottle. Fragment missing from heel of bottle. J. Dougherty 03/15/2010

AMEC Analysis: Part: Whole Year (min): 1900 Year (max): 1920 Neck Finish: Lipping Tool Manufacture Method: Hand-made Post Bottom Comments: The bottle is severely warped by exposure to fire. One aqua glass mineral bottle that has been flattened and distorted. Maker's Mark (incomplete): ZAREMBI MINER SPRING SO SEAT L WA Probably made by Zarembo Mineral Co, Seattle. Bottles shape has been deformed. Exterior surface glass is covered with dried residue creating matte appearance. Red and pink accretions present on one side of exterior. Dark brown accretion on same side near neck. L. Penttila 3/15/2010

AMEC Analysis: Part: Whole Neck Finish: Lipping Tool Decoration: Embossed Manufacture Method: Hand-made Post Bottom Comments: "767" is embossed on the base. One aqua glass mineral water bottle with round base and crown finish. Mold seams include: circular horizontal cup-bottom mold seam and two vertical side mold seams extending up to bottom of finish. Maker's Mark embossed on side of body: ZAREMBO MINERAL SPRINGS CO. SEATTLE, WASH. Bubbles present in glass. Dried substance inside and outside of bottle. J. Dougherty 03/22/2010

AMEC Analysis: Part: Whole Date Range: 1908 Neck Finish: Lipping Tool Decoration: Embossed One clear glass soda/mineral water bottle with round base and crown finish. Mold seams include: circular post-bottom seam with two vertical side seams extending up to within 1/2" of bottom of finish. Faceting on shoulder of bottle. Maker's Mark empressed just above heel of bottle: SEATTLE JUANITA 8 - S A B Co Made by American Bottle Company, at the Streator IL plant. Dates are from plant's opening, closing (http://www.myinsulators.com/glass-factories/bottlemarks3.html). Bubbles present in glass. Glass stones in body of bottle. Dried substance present on inside and outside of bottle. J. Dougherty 3/22/2010

AMEC Analysis: Part: Whole Years (min): 1850 Years (max): 1920 Neck Finish: Lipping Tool Manufacture Method: Hand-made Post Bottom Comments: The neck and finish are broken, but the height is approximately 9 inches. Four fragments of a round aqua glass soda bottle with crown finish. Neck and two smaller pieces separate from main body. Seams indicate cup-bottom manufacture. Largest fragment labeled 45KI765/M-38a, second largest labeled 45KI765/M-38b, third largest labeled 45KI765/M-38c, smallest labeled 45KI765/M-38d. Maker's Mark embossed on front: GREEN LAKE SODAWORKS GREEN LAKE WASHINGTON And on base: 347 H Object is fragmented leaving jagged, fragile edges. In main body fragment cracks emanate from an impact point below the shoulder with two cracks extending over "GREEN LAKE" and a third extending down the undecorated back side of bottle. Cracks are approximately 1.5". L. Penttila 3/15/2010

AMEC Analysis: Part: Whole Neck Finish: Lipping Tool Material: Aqua Glass Comments: This is a Chianti-style bottle that would have had a wicker base. The base is turned in a mold and the neck and finish are free-blown. One green glass beverage bottle with rounded bottom base that does not sit flat. Packer finish. May have been used as Chianti bottle. Bubbles present in glass. Dried substance inside and outside of bottle. J. Dougherty 03/22/2010

AMEC Analysis: Part: Whole Years (min): 1906 Years (max): 1920 Comments: This piece is an early light bulb. It is made by hand and has a carbon filament. One clear light bulb without base. Filaments are not connected but are present in bulb. Brown and grey discoloration on interior and exterior. Tip has been broken leaving a hole at the apex. L. Penttila 3/15/2010

AMEC Analysis: Part: Whole Years (min): 1900 Years (max): 1920 Comments: This piece is an early light bulb. It is made by hand and has a carbon filament. One clear light bulb with intact metal base. Internal filaments are still present and mostly intact. Dark grey discoloration on glass may be remnant of coating or film on interior. Metal base is corroding. Grey/brown discoloration on exterior. L. Penttila 3/15/2010