Prop horn. Silver, metal horn with a lacquered wooden body; the wooden body has seven finger holes. End of wooden body is covered with a silver, metal fitting. The long reed mouthpiece is attached to this metal fitting. Part a: body of horn, part b: bell-shaped metal end piece, part c: mouthpiece.

Part b is a round wooden strip bent in a circle with one nail to hold it in place. Nail holes are around the entire perimeter of the circle. Part c and d are dark wood with slots that are connected together by a nail and incised with rectangular cuts on opposite sides of the centre. Part e, f, g and h are flat pieces of lighter wood with bottom corners cut to one side. Part i, j, and k are bamboo rods sliced in half except for one end that is partially flatten to one side. Part l is a bamboo rod sliced in half except for one end that is partially flattened to one side and has three protruding nails down the centre. Part m is a loosely coiled piece of grass(?).

Set of diving sticks. Part a: Vertical container made from a section of bamboo painted at the top and bottom with bands of green and red. Parts b-lllll: Thin sticks of bamboo painted red at the top--the sticks stand vertically in the bamboo container.

Clear glass bottle (part a) with rounded green coloured stopper with cork and stick attachment (part b). From the neck of the bottle, the shape of the piece slopes down at an angle and ends one-quarter of the way from the top. It then slopes inwards and tapers to a base with four squared-off feet. The bottle is painted with blue, pink and black paint. On one side, there is a small bird sitting on a cliff looking out at flowers and plants below. On the other side, there is a small bird sitting in a tree. There are Chinese characters written on the top edge of the piece to the side.

A wood reel like object with four rectangular bars; each pair is connected diagonally from its partner with two perpendicular oval-like wood pieces. There is a hollow cylindrical piece at the centre which allows the object to rotate and open.

A light brown coloured fan woven out of plant fibres. The bottom of the fan curves around to a point at both sides and then curves up to a point at the top. Half of the fan is concave, and the other half of the fan is convex. The design is that of a darker black plant fibre having eight alternating rows emanating at a curve from the embedded handle point. The handle is wrapped around with an orange-brown braided plant fibre rope.

Coloured and patterned paper glued to a bamboo frame. A red paper ring serves as the base, onto which five standing human silhouettes are glued facing outwards at equal distances from one another.

Dark brown molded leather hat with wide brim. Two curved dark brown strips of bamboo are suspended underneath the hat.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs are barely perceptible. Cedar bark stitching and/or the accompanying holes at top and bottom ends of the board. Large area of rotted wood in the plank's centre. Uniform chisel marks and longitudinal cracks cover the underside.

Part a is the handle of an adze. It has an acute angle to the head where a blade would be hafted. The head is wrapped with dried grass, which would have aided the hafting process. Part b is an adze blade of stone. It has an edge at one end and then tapers slightly toward other end which is missing. Part c is the missing fragment of part b.