Necklace with a horn container. Lower portion is rough with large chips and upper portion is smooth, lighter yellow with a small, dirty piece of cloth for a plug. Large loop of copper attaches chain to horn; chain is also copper.

An arrow with a shaft (part a) made of rounded light brown wood. There is a small lance-olate-shaped iron arrow point (part b). A dried leaf fits through a slit at the end of the shaft.

An arrow with a shaft (part a) made of rounded light brown wood. There is a small lance-olate-shaped iron arrow point (part b) that has an incised line down the middle on both sides along with six pairs of barbs below. A dried leaf fits through a slit at the end of the shaft. At the end of the shaft, there is a horizontal band that has four small grooves, and a simple finial at the end.

An arrow with a shaft (part a) made of rounded light brown wood. There is a small lance-olate-shaped iron arrow point (part b). A dried leaf fits through a slit at the end of the shaft.

Light brown bamboo pipe stem (a) with copper wrapping at end opposite to bowl end. Bamboo segment has string with plastic and ceramic beads, two cowrie shells, and two nuts. The end which fits into the bowl is charred black. Dark brown pipe bowl (b) of right angled stone(?) is carved in a geometric pattern. Three pieces are glued onto top of bowl. The bowl is very fragile.

Trapezoidal metal cow bell with metal clapper constructed of one folded piece of vertically folded metal. The side edges are pressed flat while the open end is circular. The clapper has a tear drop shape with the narrow end curving to form an attaching eye. The clapper is attached with two strands of five-ply twisted fibre through holes drilled 1.5 cm. from the top (front and back).

Bell, split on the sides. The top is bridged with wire on which a clapper is tied. Wood fibre is tied around the top.

Bell with split sides. The top is bridged with wire wrapped around it and a clapper hooked on.

Bell, conical-shaped, with file marks at top where large filed loop begins. There is a raised band midway up the bell. There is a wire loop inside to hold the clapper. Both the wire holder and clapper are iron.

Wood is bent in circle with overlapping ends which are drilled, tied, and nailed. Short wooden handle with notch on one end is lashed to hoop with cord. Skin is stretched tightly over hoop and wrapped with cord which sits in groove. String piece tied near handle.