Dark brown wood piece, half of which is u-shaped. The other half is woman's neck and head with hair pulled up into elaborate crest coiffure down centre of head from front to back. The crest has one pierced hole. Facial features are carved in relief. The hair texture is incised lines. Geometric patterns cover neck and u structure. A split through centre of piece is held together by horizontal iron rod nailed through middle of wood. A bone roller, worn down in centre, is attached at a perpendicular angle between the two stems of u structure on an iron rod; stems pierced by it.

Blowgun of natural light brown wood. Wide metal lance-olate blade lashed to muzzle end with worn braided binding and five sets of rattan. Shaft tapers from mouthpiece to muzzle. 1.1 cm. wide hole at each end. Pith at centre is bored with a very small hole (slightly curved) for darts.

Blowgun of natural dark brown wood. Thin metal lance-olate blade lashed to shaft with four sets of rattan binding, the lowest one of which is wrapped around four times while the middle two are wrapped around twice and the top one is wrapped around multiple times. Muzzle is plugged with pandanus leaves. Shaft widens slightly from muzzle to butt end, where it flares to form mouthpiece. Mouthpiece slightly concave; hole at centre (0.9 cm.) edged with red wax. Pith inside hole with small hole bored through length.

Double-headed metal bells, connected at top, narrow ends by a curved metal handle wrapped with reeds. Each head is conical, two-sided, hollow and tapered, in the shape of an elongated cone. The sides of each cone are curved and joined by a flattened, protruding seam. The metal is rough, uneven and rusted away in places. Bells are mottled. Reed wrapping is natural variegated colour.

Knife (a) and sheath (b). The knife has a long metal blade, tapering from handle to rounded tip, and sharpened on both sides. The tapering wooden handle, which tapers towards the base and widens to a half-circle at the butt end, has a stamped metal ferrule. The handle is wrapped with cord and covered in stitched leather. The sheath is made of wood wrapped with leather that is incised with lines and dyed with black to form bands on the lower sections. The sheath has four raised horizontal areas near the top as well as a thong for a belt loop.

Knife (a) and sheath (b). The knife's metal blade tapers from the grip to a slightly bent, rounded tip and is sharpened on both edges. Incised lengthwise on both sides with wavy pattern. On one side the pattern is crossed, and on the other it is flanked by two curves. The handle has a stamped metal ferrule and the handle is wrapped with leather cord and leather sewn over wood. The sheath is made of wood wrapped with leather and the leather is incised with bands of pattern alternating with bands of lines as well as zigzag lines. Sections of the sheath are dyed black.

A fan of woven straw in twill weave, shaped like an inverted heart, with a tubular bamboo handle that has a split 10.8 cm. long to allow for the insertion of the fan. The handle is painted (?) with a mottled brown pattern, perforated near the butt end and held in place with a nail. The straw is purple, blue-green, and natural colours, woven in geometric design, finished with a band of braided straw sewn with unspun linen (?) thread around each side.

A fan of woven straw in twill weave, shaped like an inverted heart, with a tubular bamboo handle that has a split 8.5 cm. long to allow for the insertion of the fan which is projecting 13 cm. beyond the body of the fan. The handle is painted (?) with a mottled brown pattern, perforated near the butt end and held in place with a nail. The straw is purple, blue-green, and natural colours, finished with a band of braided straw sewn with unspun linen (?) thread around each side.

Wooden, rectangular cabinet shrine (a); open side has inner and outer set of doors, hinged at the sides, each door also hinged in the middle. Painted and lacquered black and gold, with brass trim; outer doors have gold-painted panels; inner doors have slats covered with fine cloth net. Carved panel with phoenix painted gold over inner doors. Inside is shelf with four pillars, under which are three panels with scenes. Drawers (b-c) in lower part of shrine; b has lacquered panel with scene; c is black with brass knob. Lacquered wooden tablet (d) is resting on a carved golden lotus, on two legs with eight Chinese characters.

Cut-out, repousse, gilded square metal plaque with eight equidistant holes at edges. Same motif repeated on both halves: two heads, one up and one down, with plumes and one paw surrounded by bands with zig-zagged edges and rows of repousse dots at centre of bands.