Iron lock with inlaid bronze ? designs on one side and on bottom; shaped like hollow rectangular cube, with projections from both ends of one side each 2 x 1.3 x 7cm. Between the 2 projections is a cylindrical iron rod, passing through the projection. Rod is attached to plug which is shaped to fit one end of lock; at opposite end is a rectangular perforation 1cm. long for insertion of key, which is missing. Inlaid design includes a central 'double happiness' character, and symmetrical fret and coil pattern; on projections are characters for 'to close' or 'preciousness' ? and 'riches'.

Light wood shaft cut through and joined near the midpoint. Black iron flattened spearhead hammered around the shaft and secured with one nail. Coil of wire below the spearhead. Solid pointed metal butt, flattened and hammered around the end of the shaft, secured with a coiled iron band.

Brown wood shaft, black iron spearhead, and pointed butt. Base of the spearhead is flattened and hammered around the shaft attached with a nail. Iron butt hammered around the shaft. Sixteen notches cut into the shaft near the mid-section. Shaft has been cut through and re-joined.

Dark wood shaft cut and joined with a dowel. Narrow iron point with the tang inserted into the shaft bound with tightly coiled iron and two sections of loosely coiled iron. Band of incised geometric design near the point. Metal point flattened and hammered around shaft at butt.

Tipped with a sharpened black metal point hammered around the shaft. Butt end has black metal blade hammered and rounded. Blade joined to the shaft with nails. Shaft cut near centre and joined.

Carved bone handle fitted with a metal blade. Hilt narrows from blade, broadens near end to form a small pommel. Both sides of blade sharpened and narrows gradually to slightly rounded point.

Large wood handle and small iron blade with slightly convex tip that is inserted into a split in the end of the handle.

Mottled metal rod, flattened at one end to form a double-barbed point. Edges are sharp, point is blunt.

Double-barbed metal point (part a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.

Double-barbed metal point (part a) has a sinew-wrapped metal prod and is glued into a reed collar bound in sinew. A carved wooden insertion stub (part b) joins this collar to the hollow reed shaft which is bound at each end with sinew, and notched at the proximal end.