Knife (a) and sheath (b). The knife's metal blade tapers from the grip to a slightly bent, rounded tip and is sharpened on both edges. Incised lengthwise on both sides with wavy pattern. On one side the pattern is crossed, and on the other it is flanked by two curves. The handle has a stamped metal ferrule and the handle is wrapped with leather cord and leather sewn over wood. The sheath is made of wood wrapped with leather and the leather is incised with bands of pattern alternating with bands of lines as well as zigzag lines. Sections of the sheath are dyed black.

A fan of woven straw in twill weave, shaped like an inverted heart, with a tubular bamboo handle that has a split 10.8 cm. long to allow for the insertion of the fan. The handle is painted (?) with a mottled brown pattern, perforated near the butt end and held in place with a nail. The straw is purple, blue-green, and natural colours, woven in geometric design, finished with a band of braided straw sewn with unspun linen (?) thread around each side.

A fan of woven straw in twill weave, shaped like an inverted heart, with a tubular bamboo handle that has a split 8.5 cm. long to allow for the insertion of the fan which is projecting 13 cm. beyond the body of the fan. The handle is painted (?) with a mottled brown pattern, perforated near the butt end and held in place with a nail. The straw is purple, blue-green, and natural colours, finished with a band of braided straw sewn with unspun linen (?) thread around each side.

Wooden, rectangular cabinet shrine (a); open side has inner and outer set of doors, hinged at the sides, each door also hinged in the middle. Painted and lacquered black and gold, with brass trim; outer doors have gold-painted panels; inner doors have slats covered with fine cloth net. Carved panel with phoenix painted gold over inner doors. Inside is shelf with four pillars, under which are three panels with scenes. Drawers (b-c) in lower part of shrine; b has lacquered panel with scene; c is black with brass knob. Lacquered wooden tablet (d) is resting on a carved golden lotus, on two legs with eight Chinese characters.

Cut-out, repousse, gilded square metal plaque with eight equidistant holes at edges. Same motif repeated on both halves: two heads, one up and one down, with plumes and one paw surrounded by bands with zig-zagged edges and rows of repousse dots at centre of bands.

Iron lock with inlaid bronze ? designs on one side and on bottom; shaped like hollow rectangular cube, with projections from both ends of one side each 2 x 1.3 x 7cm. Between the 2 projections is a cylindrical iron rod, passing through the projection. Rod is attached to plug which is shaped to fit one end of lock; at opposite end is a rectangular perforation 1cm. long for insertion of key, which is missing. Inlaid design includes a central 'double happiness' character, and symmetrical fret and coil pattern; on projections are characters for 'to close' or 'preciousness' ? and 'riches'.

Light wood shaft cut through and joined near the midpoint. Black iron flattened spearhead hammered around the shaft and secured with one nail. Coil of wire below the spearhead. Solid pointed metal butt, flattened and hammered around the end of the shaft, secured with a coiled iron band.

Brown wood shaft, black iron spearhead, and pointed butt. Base of the spearhead is flattened and hammered around the shaft attached with a nail. Iron butt hammered around the shaft. Sixteen notches cut into the shaft near the mid-section. Shaft has been cut through and re-joined.

Dark wood shaft cut and joined with a dowel. Narrow iron point with the tang inserted into the shaft bound with tightly coiled iron and two sections of loosely coiled iron. Band of incised geometric design near the point. Metal point flattened and hammered around shaft at butt.

Tipped with a sharpened black metal point hammered around the shaft. Butt end has black metal blade hammered and rounded. Blade joined to the shaft with nails. Shaft cut near centre and joined.