A small flat inverted u-shaped fan on a frame of very fine split bamboo radiating from the handle at the centre of the flat edge. Both sides are covered with paper, and are lacquered in red, green, black, and yellow with a red panel at the top, and a triple swirl pattern in yellow, red, and green at the centre. There is a black design resembling a paper cut near the handle area. Handle is straight, painted red, and split where the fan is inserted.

A flat fan made of finely-split bamboo flaring out from its attachment point to a long wood handle painted black. Perimeter of fan is circular except for the lower edge where the handle is attached which is straight and at right angles to the handle. Fan is covered with lacquered paper that has a design of three swirls converging at the centre coloured red, green, and yellow. It has a narrow edging of black paper. The fan is inserted into a split in the handle which is flat and lozenge-shaped where it covers the fan which is attached with two rivets. The shape of the handle is repeated with an outline of orange paint on the fan.

Ten identical small bells (parts a-j) of thin brass having each end flattened into ellipsoids. Each has a ridge around the mid-section joining two halves. There is a brass wire loop inserted at one end. The slit has a bean-shaped perforation at each end. Three bells (parts a-c) are strung on cords of twisted light red-pink silk. One bell (part d) is strung on a cord of twisted burgundy-red silk. Another bell (part e) is strung on a cord of twisted purple silk respectively. Two bells (parts f-g) are strung on cords of braided pink silk. Three bells (parts h-j) are strung on a flat cord of braided yellow silk. Each cord is approximately 4.5 cm. long (doubled).

Iron lock with inlaid bronze ? designs on one side and on bottom; shaped like hollow rectangular cube, with projections from both ends of one side each 2 x 1.3 x 7cm. Between the 2 projections is a cylindrical iron rod, passing through the projection. Rod is attached to plug which is shaped to fit one end of lock; at opposite end is a rectangular perforation 1cm. long for insertion of key, which is missing. Inlaid design includes a central 'double happiness' character, and symmetrical fret and coil pattern; on projections are characters for 'to close' or 'preciousness' ? and 'riches'.

Bronze water dropper with dark brown patina mixed with black. 4 lobed shape, with flat base and top, straight sides. Upper surface has vertical projecting rim, surface covered with overall circular indentations and raised lion and flower design in high relief. Other surface smooth. Round hole in upper surface between lion and flower; second hole at rim with protruding tube.

Seal made of single piece of bronze shaped like a rectangle with rounded edges; handle is in the shape of an elephant with a raised truck. On the elephant's back are seated two human figures. Raised characters on the underside are written in square stylized form; remains of ink around characters. Bronze has a smooth finish and a dark brown patina. Hole perforated through body of elephant for cord, now missing.

Container (a) of silver-plated copper, with bronze cover (b) in which are inserted two birds (c-d). Container consists of irregularly shaped plate to one part of which is attached a vertical rim 1cm. high, enclosing a roughly triangular area. Cover is shaped like three rocks, with suggestion of waves around them; dark brown patina with gold coloured patches. Into holes in cover are inserted the legs of two birds made of shibuichi alloy, blue/grey colour. On underside of container are three Chinese characters 'Made by Maruyoshi'. Leg of bird (c) repaired with epoxy, December 13, 1977.

Whale vertebra formed into a pipe; hole drilled in the top and fitted with a copper bowl while a connecting hole is drilled in the back. Both sides cut and incised to depict the head of an animal; rectangular eyes inset with copper.

A flat rectangular fan with two lobes at the top. Main colour is green mottled with yellow. Frame is of many very fine ribs of split bamboo (?) with paper on each side which is lacquered. Straight, black-painted, wooden handle is split and spread to allow insertion of the fan. Fan is painted orange around the handle. Around the orange area, there is a black paper cut on each side of the fan which is also lacquered. Fan is edged in dark green.

A closing fan with twenty-three inner ribs of split bamboo with a painted cloud-like design on the base of each side and two bamboo parent ribs also with a painted design set into a dark rosewood piece into which the metal rivet has been placed. Fan face is rice paper with small pastoral scene painted at the centre top with seven writing characters on the left side of the face. Attached to the metal rivet, there are two light blue-green tassels, 25 cm. long, including the cord.