Small copper arrow point attached to a bone fore-shaft.

Rounded wooden shaft - two sides flattened with hole drilled through toward butt end. The point appears to be the corner of a file embedded in the end of the shaft and held with a nail and bound with hide stripping.

Miniature harpoon with a straight wooden shaft, a short tusk handle protruding from the shaft, and a long, curving tusk head with a spade-shaped metal blade attached at one end.

Miniature harpoon with a wooden shaft, a short and a long metal spike protruding from either end, and a horn-shaped tusk inserted in centre.

Wooden model of a seal skin float with a sinew line attached at one end that has a small metal point inserted into a white piece; bone peg 'plug' extends at other end (part f). Second, separate, wooden float is part g.

Ornament made from a band of metal bent into a c shape with the ends folded back on the outside with two points cut into the edge of each. The ornament is roughly two thirds copper and one third iron, meeting horizontally along the middle, and it is incised with a geometric design featuring cross-hatched scallop shapes emphasized with incised dots at the edges.

Arrow with metal head that has slightly rounded sides and a pointed end with a short shaft that is bound to the long metal shaft with stem(?). Feathers have been bound to the shaft near the end with stem(?) whipping and the notched tip of the shaft also has stem(?) whipping wound around it.

Thumb piano made from a rectangular block of wood with seven metal prongs raised up from the wood by a strip of wood and a bent metal strip, and secured with bent metal bar that is secured to the wood with metal wire. A ridged geometric design with a triangular motif has been carved into the top face, parts of which have been burnt. Three sets of three burnt lines decorate each of the two longest sides. There is one larger hole at the centre of the wood block, and there are two smaller holes in the wood block above the strip of wood. A bent metal bar with two metal cylinders on it is attached at the bottom edge.

Thumb piano constructed from a wooden plank with several metal prongs raised above the plank with a piece of wood and bent sheet metal that have been secured with a metal bar and wire. There is a ridged geometric design on the top face of the plank below the prongs, and a narrow geometric design carved into the plank above the prongs. There is one hole in the plank below the ends of the prongs, and one hole above where the prongs are attached.

Triangular axe blade and cylindrical axe butt attached to long and tapered handle.