bent piece of machine made metal wire, no identifying features, grey patina, red and green oxidization, cracks corroding outside edge of curve, scratchs are brassy, likely copper allow

metal wire drop-down handle from drawer or cabinet hardware, or from a bucket, circular wire the same thickness throughout the handle, ends curve outward, no decoration or marks, dark grey patina, scratched marks appear copper

metal wire fragment, width and thickness measurements are the diameter, round, possible handle fragment, scratched areas appear brassy, mottled grey and black patina with some dark red oxidization

similar to #268 but larger, drop-down handle from drawer or cabinet hardware, elongated oval with ends curling back under, no visible design or pattern, mottled red/dark brown and green oxidizaiton, corrosion or flaking on one side, circular in cross-section, thicker in the middle and tapering towards ends that 268 attach to rest of hardware

brass cabinet pull with drop-down pull, handle is an elongated oval (45.5mm long, 111.6mm wide, 3.60mm thick) of different material than plate, with symmetrical oval embossed designs on one side and matching scalloping on the other, maybe handle was replaced? Plate has starburst-type design radiating out of a cross in the middle (not Christian, on side), likely was created by a punch embosser as mirrored design is on back. Handle is tarnished dark brown, plate is tarnished light brown on one side adn no tarnishing on back, bright brassy colour, pins hoping handle fixtures on have square nuts

metal spigot with a screw-type end and one tap, two openings perpendicular to the tap opening likely for control of flow, shape similar to those used for barrels and casks for wine, beer, or other alcohols, no identifying marks, scratch marks appear brassy in colour

metal fragment folded over numerous times, looks machine manufactured, possible rim piece of a larger can or tin, red and green oxidization, dark purple/grey patina, some corosion, no other identifying marks

drop-handle pull, rectangular, strained edges, rusting (red) on screws on back of artifact, rest of artifact has green oxidization. Handle (27.78mm long, 73.81mm wide, 3.53mm wide) symmetrically designed on one side with four round depressions in increasing size on two edges, long edge has two lines incised on the outside area, then a tear-dropped shape with point oriented towards middle of handle, and then four incised lines in the centre, other side blank. Hinges for handle round with incised line perpendicular o hinge. Face of pull symmetrically designed in floral pattern. Likely copper allow with iron hardware.

chinese brass box lock, missing key

multiple nails; rusted; one is bent