Rain garment woven with an opening at the front, the edges finished with a blanket stitch, two protruding flaps at the top, each with a cord loop, and cord ties at the front centre near the top. The bottom edge is unfinished with a fibre fringe.

Red woven textile with stripe design. The textile is rectangular in shape with an opening at one end. The design alternates double blue and white stripes with a single patterned blue and white stripe on red ground. The inside is unlined.

Long white ramie coat with long sleeves and an overlapping centre opening with ties. The coat has a V-neck with inner and outer facings of the same material and rounded corners at the lower edges. There is a narrower outer facing or collar of white silk-like fabric squared at the lower ends and hand-sewn in place. Two wide ribbon ties are attached at the mid-points of the wider facings and there are shorter, narrower ribbon ties on the inside. The sides of all ribbons were left unsewn. The sleeves are inset with straight seams with additional seams between elbow and wrist and slight convex curves at the lower edges. There are square reinforcements in the underarms. The coat has a centre back seam, a pair of flared gussets under each arm and a slightly flared panel descending from the mid-point of each outer facing so that the coat overlaps at the front when closed. The left facing has a wide hem as does the bottom of the garment. The sleeves have narrower hems. All seams are very narrow.

White ramie vest with a V-neck and centre front closing with four white plastic buttons. The lower edge curves downward in the centre front. There are pockets sewn on each side of the centre opening and a third smaller pocket on the upper left side. There is a centre back seam. All hems and seams are very narrow.

A black brimless hat, light brown on the inside, with an oval opening for the head. Made of fabric pasted over heavy paper, lacquered black which has then been cut and folded to form the hat which is held together by lacing with a heavy twisted cord at the back. The two cuts form diagonal lines at each side, ending in two points at the upper front. There is a fold parallel to the wearer’s shoulders across the top of the hat, from which a straight-sided flap forms the outside of the back. This is attached to the ends of the wrapped front panel at the centre back with lacing. A narrow edging of paper is pasted along the lower edge of the hat. Small tassels of twisted yellow silk cord at the back. There is lacing of grey-white paper cord.

A light brown brimless hat with an oval opening for the head. Made of light brown fabric pasted over heavy paper which has then been cut and folded to form the hat, which is held together by lacing with a heavy twisted cord at the back. The two cuts form diagonal lines at each side, ending in two points at the upper front. There is a fold parallel to the wearer’s shoulders across the top of the hat, from which a straight-sided flap forms the outside of the back. This is attached to the ends of the wrapped front panel at the centre back with lacing. A narrow edging of paper is pasted along the lower edge of the hat.

Doll representing a female figure carved out of wood with articulated shoulders and ankles. The doll's face and hands are painted white, with eyes and eyebrows painted in black and the mouth painted in pink. The doll's hair is painted in black on the crown of her head with a braid hanging down her back and adhered to the back of her head. A strip of blue-green silk is braided into the hair, and the braid is tied at the top with a ribbon of burgundy silk. She wears a pink skirt with a white cotton waistband with long ties, tied in a single-loop bow at the front over two pairs of white under trousers with a back slit, the outer pair of which is voluminous. Above this she wears a short greenish-yellow jacket with burgundy outer neck facing and wristbands, and narrower white neck facing. This is tied with burgundy ribbons in a single-loop bow. She wears shoes with pointed, upturned toes painted pink with a black linear and loop design, and socks of white ramie.

Trousers made of white ramie. Trousers have a wide, straight waistband from which the legs angle out in a wide V. There is a continuous seam on the inner edge of the legs and rounded crotch and second seams, front and back, about one third of the width away from the centre seam. An additional seam, front and back, angles away from the centre of the crotch to one of the leg seams. The inner edge of the trousers is rounded in a convex curve, narrowing to the ankle. All hems and seams are very narrow.

Padded under-trousers of fine white cotton fabric, lined with coarser off-white fabric. Pants are angled out from the pleated waistband to the ankles. Waistband opening at the back, attached to narrower long ties. Pleats face towards centre seams, front and back. Flared panels are attached to each side of the back opening, which is carried on in the open inner leg seam, sewed together just above the ankle. Dark blue ribbons of shiny silk are attached to each inner leg seam at the bottom. There is a horizontal seam in the outer white fabric at about knee level.

Padded under-trousers of fine white cotton fabric, lined with coarser off-white fabric. Pants are angled out from the pleated waistband to the ankles. Waistband has opening at the side, to which are attached narrower long ties. Pleats face towards centre, front and back. Crotch is open from the waistband to the knee, with the opening concealed by additional knee-length panels, each continuous from their insertion into the front waistband to their insertion into the back, extending inward from the opening on the inner edge of each leg. One panel slots inside the other. Inner leg seams each form a convex curve.