The tip is coiled with yellow-brown plant fibre, below which, there are the five sets of four increasingly longer barbs with brown plant fibre coiling in betweeen. Below this, there is tapering cylindrical shape that has a grooved pattern with red and yellow plant fibre coiling underneath. The brown wood shaft is plain and tapers at the end.

Club has handle with half circle finial, and is wrapped with braided fibre that is filled in with pitch. Diamond-shaped paddle-like end has perpendicular ridges.

Brown wood double whistle made of two single whistles of equal length bound together by brown twine. Both pieces are rectangular in cross section and come to a tapering end and are bound in five relatively equally separated places with brown twine. While the wider end is solid on each piece, there is a hollow (two in total) through the tapering end where there is a taper cut rectangular hole (two in total) nearby on one side. Cloth used along the sides of on one piece.

Brown wood whistle that is oval in cross section and has a knob at one end and bound around near the smaller end and around the knob with brown twine. While the wider end is solid, there is a hollow through the tapering end where there is a taper cut elongated semi-oval hole nearby on one side.

Hook with single barb hafted onto a wooden fore-shaft. The foreshaft is bound with twine which has been coated with pitch. A braided lanyard is bound onto the end of the fore-shaft.

Model version of an Eastern woodlands style canoe. Canoe is made from birch bark lashed to a wooden frame with root lacings. Upper edge of the canoe is rimed with a slender branch that is overcast with strips of root. Black, resinous pitch is used to patch seams and holes in the birch bark.

Plain, tapered, brown wood shaft. The point has a bone tip with finely serrated edges along each side fastened with pitch. The upper portion of the shaft from the top down consists of the following: an alongated pyramid shape; a pyramid shape; and a flattened hour-glass-like shape with a central horizontal band outlined by a groove at either end. The shaft tapers to a slightly flared end.

Brown double reed whistle that is rectangular in cross section and comes to a tapering end and is bound in brown twine in three sections, one near each end and one near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut semi-oval hole nearby on one side and a taper cut elongated semi-oval hole on the opposite side. Sealed with pitch.

Brown wood whistle that is rectangular in cross section and comes to a tapering end and is bound in three places with white twine, one near each end and one near the middle. While the wider end is solid, there is a hollow through the tapering end where there is a taper cut rectangular hole nearby on one side. Seams are sealed with pitch.

Tapering cylindrical four-reeded brown wood framed ivory(?) whistle that has a knob at the wider end. Bound with brown cord around the middle and around the knob itself. The end opposite to that of the knob end has four hollows through it connected by an x-formation and four taper cut semi-oval holes nearby around the sides. Sealed with resin gum.