Wide, round-bottomed boat (a) with sharply pointed bow and stern. Frame consists of wood slats fitted and lashed together with sinew. Skin is tightly stretched over frame and laced down. Boat has oar locks, formed by two pegs projecting upwards, two on starboard side, two on port, and three wood thwarts. Boat has five long, carved wooden paddles: (b) to (f) each flare gradually from handle end to blunt paddle end. All wood of boat and oars is yellow-white in colour.

One carved piece of wood contoured to fit the face. Narrow eye slits are blackened on interior. Two drilled holes on one side, five on the other. Of the five, four are plugged with sinew. Top corner is broken off.

Long, flat wood object with a u-shape cut in both ends. Thin cord is wrapped five times around one end and knotted. Other end has hole which is threaded with a thicker cord forming a half-hitch knot over one fork to make a long loop. Loop end has a long thin strip of horn(?) with one end doubled over cord and wrapped with sinew.

Double layer of stiff white rawhide stitched together on all sides except the top where there are two dark brown loops. Darker leather, stitched on halfway down rawhide, has five slits cut through to hold four bone tools. Two brown white coloured tools, round, slightly curved, pointed at one end with a lip at the other, are joined together with leather thong. Two other tools are brown, each have a lip at their top, and a round shaft which flattens and curves then tapers to a point.

Leaf-shaped metal point inserted in slit in antler piece and riveted. Hole drilled crosswise through antler which is hollowed out at the end, cut diagonally and wrapped with sinew.

Wood shaft with one end cut on angle where arrowhead was once inserted and lashed on with sinew. Notched nock end has two feathers, one on either side, bound top and bottom with sinew.

Wood shaft with v-shaped cut where arrowhead once was inserted is bound with sinew. Notched nock end has split feather on either side, bound top and bottom with sinew.

Wood arrow shaft with hole where arrowhead once was inserted. Notched nock end has split feather on two sides, with top and bottom bound with sinew.

Small, triangular-shaped metal head with 18.1 cm. Long shaft hollowed out on back, one large gouge on front. Metal shaft inserted in wood and both bound with sinew. Top and bottom of split feather bound onto both sides of shaft's notched nock end with sinew.

Small, triangular leaf-shaped metal point with 9.5 cm. Long, slightly squared shaft inserted in wooden shaft, is bound with sinew.