Model lamp carved out of stone, roughly oval to triangular in its top view. The object has a convex interior with a sharp crease along the bottom running from left to right. A thick upper rim is carved into one side of the lamp. The exterior bottom is rounded with a sharp ridge at middle.

Small model of an oil lamp. The piece is carved out of stone, roughly triangular in its top view. The lamp is convex like a bowl, with a sharp crease on the interior bottom running through the centre. The rim is thin on the long sides and wide at the two corners. The exterior bottom is rounded with a small flat area that allows the lamp to stand upright.

Rectangular pot, flat on bottom, with angular corner edges and straight sides that curve slightly inward toward the top. An irregular zigzag pattern is carved across one side and remnants of red and green paint can be seen on the base and on another side. The rim has a hole in each corner to insert a hanging string. The interior of the bowl is rough. A small hole is bored through the bottom centre with a piece of wood inserted that comes out the base.

Stone weapon. Object is long and thin with a hole bored laterally through the centre. At each end are carved three shallow encircling rings.

Stone disk. Object is oval with a slightly bulging profile top and bottom. A deep, encircling groove has been carved around the edges. The top is covered by a set of straight, parallel, and neatly gouged lines, 14 in all. The stone is smooth and shiny, and the edges of the groove and line-gouges are smooth and worn.

Small stone bead, cylindrical and squat in shape, with a hole bored laterally through the centre. The hole is narrow at its centre and flares toward the outer edges, causing the bead to have relatively thin walls at its end points.

Small stone pendant, possibly in the shape of an animal or fish. The piece is long and thin, with a blunt uplifted point in front that has a hole bored through the stone. The rear is also uplifted and flattened to a narrow horizontal edge. Along the bottom near the front are carved several protruding bumps.

Small stone tool, round. Object is short and cylindrical with a hole bored through its centre, small at the base and flaring widely toward the top. This flare is reflected only slightly on the outside wall of the object. Two raised, encircling rings are carved into the exterior just under the rim. The base is a round flat ring with two small carved notches.

Small stone pendant, possibly in the shape of an animal or fish. The piece is long and thin, with a blunt point that has circular perforations on either side that mimic eyes. Small “x” shapes are carved into one undulating edge that ends in a flat base. A hole is bored through the stone near the base.

Stone blade, or possibly pendant. The object is long and thin with slightly bulging sides, one end an asymmetrical triangle, the other blunt. Two tiny holes are bored through the edges of the object close to the triangular end. The top of the blade has a partial ‘x’ shape carved into it, while the bottom has a wide ridge carved along its length.