Female form with arms slightly out from sides ending at hips. Round head with wide nose and forehead in higher relief than cheek area. Eyes, eyebrows, and mouth are indicated by horizontal lines. Diagonal lines curve under cheek from nose; breasts and stomach protrude. Footless legs are flat along inside edges and calves and knees protrude slightly. Crease along backbone and buttocks.

Degraded ivory tapering harpoon head with open rectangular socket at curved base with side to right of socket tapering to a point. Small diagonal slots on both sides of open socket are close together on opposite side. Line hole above socket; terminal blade end is broken with one side missing and part of one side of second also missing. Remnants of curvilinear designs terminating in small deeply drilled holes. Base is grey.

Ivory harpoon head with beveled edges and curving sides, flaring out at base; open rectangular socket with line hole above and thin blade slit at tapering rounded, terminal end above hole. Small enclosed slot parallel to socket on unbroken side, this side tapers to a point; opposite shorter side is broken roughly at socket. Incised curvilinear designs terminate in small deeply drilled holes. Overall appearance is mottled yellow-brown to dark brown. 'P-1827-1-d' is inscribed in black letters along socket slot.

An arrow shaft, 79 cm. long, made of a variety of pitpit (sword grass). Light brown near the fore-shaft, darkening to black at the end from a coating of a black substance. The fore-shaft of black palm wood, 24.5 cm. long between the point and the shaft, is incised with a pattern of elongated dots and wavy lines coated with red ochre. The fore-shaft is bound to the shaft with sleeve of woven rattan 2 cm. wide. The long point is of hollow bone with a broken tip, bound to the fore-shaft with a sleeve of woven rattan.

An arrow shaft, 88 cm. long, made of a variety of pitpit (sword grass). Light brown near the fore-shaft is darkening to black at the butt due to a black coating. The fore-shaft of black palm wood, 18 cm. long, is inserted into the shaft and bound with a woven sleeve of rattan 1.5 cm. wide. The fore-shaft is incised with dots and zigzag lines. The long point is made of solid bone, protruding 6.5 cm. beyond the fore-shaft and bound to it with a band of bark cord 10 cm. wide and a sleeve of woven rattan 1.5 cm. wide coated with red and yellow ? ochre.

Loom (part a-g) consisting of a partly woven belt with unwoven warps, attached shedding devices and accompanying wooden and bone tools. The symmetrically striped warp and belt section has three chevron bands flanked by rainbow colour stripes set against a dark red ground. There are cylindrical loom bars at each end; the bottom bar is part c. In the middle are three sticks with string heddles and a shed roll (part b). In addition, there is one stick with a flattened point and another straight (part d), round stick for rolling the cloth (part e). Two small skeins of blue yarn extend from each side of the woven web at the final row. There is a slightly smoothed bone pick (part f) and a length of brown cords (part g) is used to tie the bundle together.

Skin covered kayak with a single angled cockpit; relatively flat on top and keel; rounded bow tapers to a point and raises slightly from bottom; stern also tapers to a point and is raised from bottom. Series of evenly spaced (where visible) ribs attach to gunwales; ribs are flat on bottom and curve sharply at sides. Three longitudinal keel supports and additional supports around and extending from cockpit. Numerous skins are sewn together, covering kayak; the skin is sewn to a bent wood rim at cockpit. In front of cockpit is a bone support attached to top, side of kayak by a leather thong which passes through two holes on base of the support and through two holes on either side of kayak. There is a rope attached to the back of the cockpit on both sides. The skin covering is pieced by stitching in numerous places.

Brown bentwood oval box with lid (part b). Box is one piece, with bent sides with bevelled edges forming a flush side, sewn together with two parallel rows of baleen(?) and leather. Rectangular walrus tusk clasp between sewn rows with hooked appendage and six holes (or sets of holes), two form 'eyes' with hook as 'nose', attached through holes with leather strips. Two parallel grooves at top and bottom of sides. On opposite side is second walrus tusk rectangle with five sets of holes with leather strips attaching it to box. One top corner has wooden pegged (three) strip of wood; a longer damaged pegged (six) strip on end. Two holes on non-clasp side for attaching lid to box. Both are broken, remnants of one are on box, the other. Lid has a horizontal row on top of 7 beads with the central bead being light blue and the others being dark blue.

Stylized human figure which follows the form of a vertebral spine with a sawn heart-shaped face. The face has a notch at top centre, line across forehead, holes (part way through) for oval eyes, small circles for nostrils and a crescent at mouth. Sawn, rounded shoulders; deep channel indicating arms which sweep down at sides; body expands out into partially eroded, squared off centrum. Phalange (of spine) extends out from sawn area below figure at back. Back side of figure has channels along arms.

Bowhead whale shaped handle or toggle with a rectangular hole transversely through centre; oval incised flippers at bottom corner of hole, just before inlaid eyes and beginning of mouth incision which follows long tapering snout. Narrows before tail flukes at back.