Straight length of bone slightly flat with rounded sides, one end has grounded cross cut and other comes to tapered point. 11 evenly spaced lines run arcoss width along length on one side. Other side smooth. B.Avery 10/31/2003.

Straight length of bone with rounded sides and ends. Nine evenly spaced incised lines run across width and along length on one side. Brown color with white residue. B.Avery 10/31/2003.

Short, straight length of bird bone with one ground cross cut end and an unmodified broken end. Very even black color. B.Avery 10/31/2003.

Length of bone half straight and half curved. Ends and back show old break. Other three sides rounded with 14 incised lines carved on inner and 23 on outer portion of curveture. Straight half of bone is smaller in diameter than curved half. B.Avery 10/31/2003.

Rectangle piece of bone, one long side has broken edge, one end has carved step, other side and end are ground smooth with rounded corner. Outer face is slightly arched, and has pattern of shallow drill holes, a row of three holes spread across rounded end, then a row of four, and a row of five. Then a space of 1.3cm folloed by a row of five smaller holes, and a row of six at the carved end. No markings on back. B.Avery 10/31/2003.

Flat oval shaped bone with rounded notch indented at one end.Brown on one side, white on other. Insiced line near notched end on white side. B.Avery 10/31/2003.

Piece of bone tapering to sharp point. Wider half is ground flat on one side showing inner bone, other side is rounded into half circle. Opposite half is rounded to conical point. B.Avery 10/31/2003.

Narrow piece of rod like bone with slight taper. Both ends have cross breaks, and another cross break at center has been glued together.

Partial bone shaft ground flatish on one side, reveiling some inner bone matrix 3.5cm-5cm from point, and depression of bone cavity at joint end. Joint end has chips and gouges on narrow side, and tapers toward mid shaft to broken 0.5cm point. Bone white, with polished patina. B.Avery 10/30/2003.

Shaft of ulna bone with worn joint end showing inner matrix on edges. Natural tapering to narrow 0.5cm point which has unmodified break. Possilbe polish. B.Avery 10/30/2003.