Wooden, oval-shaped plaque-like mask. Square hole carved at the bottom and wing-like attachments are on either side, tied to the main body with roots(?). Attachments painted black, on both sides, with crosshatching designs overtop. Primarily done in white with red strokes throughout. Main body painted red-orange, on both sides, with rows of design overtop. Rows have large white “X”’s with thin black ovals in between. Centres of X’s are painted red-orange. Plain black bands between rows, trimmed in white. On the front, the centre oval in the top row has a white chevron border. Above the oval is a sculpted head. Cheeks of face are unpainted, the nose is red, and there is a large black beard covering the bottom portion of the face. It has one thick black eyebrow with two small white eyes underneath. Figure is wearing a headdress(?). Headdress has a red cap with an upside down white triangle in its centre. Headdress extends into a large black circle with white stripes. Area around square hole, on both sides, is unpainted.

Large “V”-shaped halibut hook made of two pieces of wood. Arms are tied together with fibre cording at the angled end. Longer piece is thin and straight, thicker piece has a triangular head and an iron barb tied to its other end. Barb faces inwards and is at an acute angle. Wooden wedge tied to thicker arm with fishing twine. Twine is long, fraying and white-grey. The thin arm of the hook is carved into an otter-like figure, with a hole through its middle. A thick and braided piece of fibre cording, with a knotted loop end, is strung through the hole.

Disassembled halibut hook made of wood. Thin arm of hook (part a) is carved into a bird figure at its top, has a rectangular shaft and conical bottom. Cone is carved in high relief. Entire arm has a flat back. The bird figure has large circular eyes, a long beak pointing down the body, wide legs and feather designs incised on its wings. There is a hole through the middle of the bird, just above the fork of its legs. A thick and braided piece of fibre cording, with a knotted loop end, is strung through the hole. Wood is brown-yellow, cord is beige. Thick arm of hook (part b) has a triangular head with a wide, rectangular groove in its centre. Groove was likely where the arms would have been tied together. Bottom of arm is slightly angled. Wood is brown-red. Iron barb is missing.

Loom with a partially completed weaving tied to four bars (part a). Weaving attached to bars at the top and bottom with one bar, intertwined in the weaving, towards the bottom, and another attached to the back, towards the bottom. There are three removable swords (parts b-d) and one removable shuttle (part e) stored in the weaving, at the bottom. The attached bars are all made of bamboo. The shuttle (part e) and one of the swords (part c) are made of light yellow-brown wood, the other two swords (parts b and d) are dark brown. The shuttle has notched ends and is wrapped entirely in orange thread. The weaving on part a is orange and has rows of repeated designs across the entire surface. Row designs include: loose chevron pattern, tight chevron pattern, dotted squares, dotted lines, "X" design across length with squares in the negative space, and abstract "V" design across length with squares in the negative space. Designs done in indigo, red, yellow, black, green, dark blue, white and electric blue. Rest of weaving is incomplete and orange in colour, with loose strands of black and yellow throughout. Three metal rings attached to the top and bottom loom bars- one on the top, to the right of the weaving, and two on the bottom, on either side of the weaving.

Bird puppet with a black head carved with designs, some painted yellow or dark green, and a large red beak. A dark blue and yellow ridge extends down the length of the head and bill. The lower jaw moves, and is controlled by a length of plastic cord that is tied to a lever within the head. The jaw has small rectangular sections of rubber attached on either side of the mouth. Three small yellow birds with green, light blue and black spots are carved at the back of the head. The centre bird is largest, with two smaller birds on either side of the head. The puppet has a short burgundy fabric neck.

Large bush buffalo (sigi) puppet head, with figures above, attached to three ladder-like superstructures. The animal head is carved with thin repeating lines, which are painted white and with rows of coloured dots overtop in red, yellow, black, green and blue. The nose is black, with open nostrils. The large ears with repeating green diamonds are folded forward, sitting just below the large eyes with metal eyelids and circular nail head decorations. The mouth is hinged and opens, and is held in place with rubber inside the head. There is black pattern with orange and yellow fabric cover extending from the neck, and two long lengths of horizontally striped, woven textile extending from the chin. On top of the central superstructure is a black bird with red beak and crest, moveable wings with fabric over joints, and is painted with rows of repeating dots in yellow, white and blue. On each side superstructure, are small yellow human-like figures in tunics with moveable arms that move up and down and hold white fish. At the top of each, facing forwards, mounts two large yellow female human-like figures in tunics with breasts exposed, with moveable arms that are each holding a round shield or sign in green, yellow, white and red with an arrow design at centre. Each has a length of plastic cord threaded down through superstructure.

Large white winged horse puppet, with a bright pink human head on a long neck with three neckrings, and a length of knotted fabric. The head has a headdress or helmet, has long black hair that hangs to one side, with the hair cut short on the other side. The body has a painted green saddle, with a zigzag line border in multiple colours. There is red fabric lining the chest and abdomen. The legs are attached to the body with metal plates. A pair of large, flat, detachable painted wings (parts b-c) fit into slots on the back. Each wing is red with designs in grey, green, off-white, and yellow. A carved wooden horn-like piece (part d) is detached (possibly used as a tail?).

Large antelope puppet head, with very tall horns. Head of animal puppet (part a) with two small antelope headdress carvings (parts b-c) that attach to the tops of the horns, and a separate manipulation stick (part d). The head is painted bright orange, with green markings, and a large white diamond design centre of the forehead. The two stylized wooden antelope headdress have elongated head and horns, all covered with incised line patterns, and dwarfed legs. The manipulation stick is roughly shaped with a hole horizontally through the rectangular end.

Model canoe (part a) with a long, tall notched prow, a flat bottom, and blunt stern with a vertical transom. The prow is carved in the shape of a wolf head. Painted with a red interior. Small lightly etched circles decorate both sides of the bow and stern. There are four thwarts or benches across the width. Two shorter paddles have red blades (parts b-c) and two paddles have green blades (parts d-e).

Painted model pole carved with (top to bottom) eagle, man, bear, animal figure; on a grey rectangular wooden base. The eagle has separately carved and attached wings spread out to its sides. The man wears a Plains-style bonnet and is seated with arms crossed in front of his body. The black bear is in an upright seated position, with a small yellow animal at its feet.