Pair of plain, round, tin metal earrings with metal hoops attached at tops and covered with material. Part a has leather covering the hoop, and part b has brown-yellow rubber covering the hoop. The small groove in each earring is filled with dirt in some areas.

An arrow with a shaft (part a) made of rounded light brown wood. There is a small lance-olate-shaped iron arrow point (part b) that has an incised line down the middle on both sides. A dried leaf fits through a slit at the end of the shaft. At the end of the shaft, there is a horizontal band that has four small grooves, and a small simple finial at the end.

An arrow with a shaft (part a) made of rounded light brown wood. There is a small lance-olate-shaped iron arrow point (part b) that has an incised line down the middle on both sides. A dried leaf fits through a slit at the end of the shaft. At the end of the shaft, there is a horizontal band, and a simple grooved finial at the end.

Metal-tipped spear with wooden shaft. The spear tip has been inserted into a split in the top of the shaft, and has been secured with cord that has been woven around the shaft. Tip of spear is pointed and sides are rounded.

Drum made of wood covered in animal skin with short, mottled off-white and brown hair. Overall drum shape is cylindrical at top half, and tapering towards base on bottom half. One piece of skin stretched over bottom and up sides with a scalloped edge is joined to a circular piece of skin stretched over the top of the drum by wound strips of skin that have been pulled through holes at the edges of both pieces of skin. (Pink synthetic ribbon attached to one of two handles at top edge.)

A tall thin curved hide shield with each of the four corners curving outward. The handle is a long stick down the middle which is looped at the centre. Hide binds parts of the handle to the shield. There is a ball of dark feathers (part b) that is said to go with the shield.

Rattle has a long stick handle, with a woven globular-shaped basket on one end. The basketry ball has metal(?) pieces inside that rattle.

Part a is a long hollow metal spear with a lance-olate shaped tip end. Part b is the long hollow metal point. The two pieces do not fit together as is; they appear to be missing a wooden piece that would join them together.

Part a: a long, tapering metal spearhead with a broad, leaf-shaped tip. Part b: a long, conical metal spearhead that tapers to a point. Both parts a and b are fitted onto short lengths of wood with pointed ends with a metal bolt driven through the wooden shafts. The ends can be rotated to a shorter length, side by side, or rotated out to be over 2 m long, joined at the middle. (The 2 pieces do not currently come apart.)

Metal-tipped spear with wooden shaft. The spear tip fits over the end of the shaft. Tip of spear is pointed and sides are rounded.