A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; segments of thick black formlines are visible over the entire surface. A longitudinal spit runs from one end towards the centre. A bright pink, encircled number nine is inscribed on the underside of the plank in the centre and at the two ends. Underside is covered in large, uniform chisel marks.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs are clearly visible on the upper half of the surface. The outer edges are very worn. A longitudinal split runs from the upper end of the board. The underside of the board is covered in uniform chisel marks and a single longitudinal gouge that runs its length.

A long rectangular cedar plank with faded painted Northwest Coast designs imprinted in the surface of the wood. Orange patch of crackled wood near the centre of the plank. Black and red coloured designs are more visible near the bottom of the piece. Small rectangular holes spaced across the length of one edge. The other edge is jagged and uneven. Chisel marks and nail(?) holes overall on underside of object.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs are visible over the entire surface. Underside is covered in uniform chisel marks, patches of black discolouration, has rectangular and vertical indentations at one end, and is inscribed at one end with a bright pink encircled number 7.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs visibly cover the entire surface. Cedar bark stitching and/or the attendant holes at both ends of board. Nail holes irregularly spaced around the outer edges. Underside is covered in uniform chisel marks, with an encircled number ten inscribed in bright pink near one end. Rectangular indentations at both ends on the underside.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; only small portions of the designs are visible. Several longitudinal splits. Wood in the centre and towards one end is rotted with material missing. Many nail holes. Underside is covered in chisel marks and longitudinal gouges.

Deeply convex crescent-shaped gorget with rolled edge. Holes at each upper edge. Engraved with snake between letters “G” and “R”. Two suns with rays. Makers’ marks on reverse.

Heavy, deeply curved gorget, with two holes at the top of the two curves, for hanging. Engraved with a canine (wolf or fox) stepping through grass. Maker’s mark stamped at upper left.

Pair of light brown wooden snowshoes; one end is narrows slightly to an upturned, round tip while the other tapers to an extended point. Two wooden crossbars separate the rawhide mesh-like latticework into three main sections, with the latticework in the central section being of a thicker construction.

A long rectangular cedar plank with faded black and dark red Northwest Coast designs imprinted in the surface of the wood. Rectangular incision near the top and bottom of the plank that has cedar bark stitching embedded in it. Rectangular indentation on the back near the bottom and top of the board.