Axe handle that is round with a slight flare at the butt end. The other end is split into two for about 26.5 cm where axe head would be hafted. The axe head is separate from the handle.

Piece of cloth detached from a cradle puppet. A roughly pennant-shaped piece of white cloth painted with a design in black. A small piece of wood is tied to the upper right corner.

Two pieces of painted cotton (parts b and c) that used to be attached to the wooden bird headdress (part a). Part b has red and black Northwest Coast style designs, including a face, painted on it. Part c has Northwest Coast style feathers painted in black and a scalloped, feather-like edge along one side.

Three pieces of painted cotton that used to be attached to a wooden bird mask (part a). Parts b and c have green and brown feather-like designs painted on them; part d is painted with green and blue shapes.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; segments of black and red designs are visible over the entire surface. Several longitudinal cracks both ends. Small holes in the surface. Cedar bark stitching at both ends. Chisel marks, longitudinal cracks and black patch-like accretions on the plank's underside.

A long rectangular cedar plank with faded black and red Northwest Coast designs imprinted in the surface of the wood. Designs are more visible near the top of the plank. Bottom edge is jagged and top edge is cut at an angle. there are two horizontal cuts at the top and side of the plank. Back has a rectangular indentation near the top and bottom. Medium sized hole near the top of the plank.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black designs visible near the centre. Surface dotted with nail holes and one nail. Area of rotted wood near centre, extending to the underside of the plank. Underside covered in uniform chisel marks, patches of black discolouration and longitudinal gouges.

Mask with protruding cylindrical eyes that are moveable. The mask is painted with heavy black eyebrows, red nostrils and lips, a black moustache, and the cheeks are emphasized with red painted designs. The remainder of the face is painted white. Cedar bark fringe extends down back past the bottom of the mask.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red formlines, ovoids, u forms and split u forms visibly cover the entire surface. Two large longitudinal cracks run from the ends towards the centre. A bright pink v-like letter in a circle is inscribed on the plank's underside near the bottom (?). Underside is covered in uniform chisel marks.

A long rectangular cedar plank with faded Northwest Coast designs imprinted in the surface of the wood; black and red designs cover the entire surface. Cedar bark stitching or the accompanying holes at both ends of the board. Underside has uniform chisel marks, longitudinal cracks, and two rectangular indentations at either end.