Brown comb made from one piece of wood. It has ten long, straight, thick, tapered teeth that are evenly-spaced. Narrow handle with triangular areas composed of incised parallel lines at different angles. The two comb sides differ in design. Sitting in crouched position and hugging centre of handle is forward-facing human figure, arms and hands supported by knees also support elongated head from under chin. Head slopes down towards back. Head covering or coiffure patterned with same design as on comb handle. Face and hands are light brown.

Dark brown coloured wood comb made from one piece. It has thirteen long, tapered, thick teeth, with uneven spacing and carving and some that are slightly angled. The handle is rectangular and is patterned with triangles composed of incised parallel lines alternating with plain areas. The two sides of the comb differ. Projecting vertically from two top corners are two plain, geometric-shaped standing birds facing one another, silhouette-like with long beaks; beak of one broken off.

A one piece yellow-brown shaft which continues into a dark brown rounded elbow-shaped end. On the opposite side to the elbow projection is a flat rectangular metal blade inserted on a downward angle, and perpendicular to the shaft in dark brown wood. The upper blade corners are rounded, and the corners at the sharpened slightly convex end are squared. 'M' is engraved on the blade's underside.

Elliptical dark brown wooden bowl (part a) and lid (part b). The lid only fits partially over the sides of the bowl and has three plain, geometric-shaped ducks in a line lengthwise across top. Each is quite angled and abstract and the ends of the tail are incised. The heads and necks of the birds at the front and back are missing. The bowl has small, circular base, the sides flare gradually to a slight shoulder with a rectangular raised area at one end and the lip is angled on the inside. On the rim at each side is a row of incised triangles with the points facing inwards.

Thin brown smooth-backed wood piece. Narrow rectangular wood platform has on top seven metal tongues (keys), once nine, evenly-spaced in a row, placed lengthwise to the wood piece, and held in place by a lateral bar wrapped in metal strips that are inserted into the wood piece through to the back. Length of knotted hide strung through two holes at same end. Large hole in the middle of the wood piece. Lateral bar inserted in the edge with two loosely-wrapped metal bands. Carved with a main geometric design consisting of four parallel horizontal bands, from top to bottom: diagonal lines, opposing diagonal lines, four double-outlined u-curves, and four upside down u forms with diagonals inside.

Thin light to dark brown carved box resonator, open at the lower end, and tapering towards tapered metal tongues (keys) held relatively parallel to one another lengthwise on the top by a metal lateral bar, and spaced by short bent metal pieces inserted in wood. Tongues' lower ends upended by lateral bar placed underneath. Carved panel lower end has crossing diagonals and a large flat rounded nut strung on hide knotted through holes on either side widthwise across the panel. Small reddish brown nut-like metal container strung on left with cotton thread. Box opening has lateral metal bar with four loosely wrapped metal bands. Length of knotted fibre strung through two holes at box's upper end.

Light brown comb made from one piece of wood. It has seven long, thick, and tapered teeth. The tip of one tooth is broken. Teeth are evenly-spaced, and some are slightly angled in spots. Rectangular handle has pattern of horizontal jagged, zigzag lines. The other side of the handle is decorated with triangular areas of incised lines. Projecting from top of handle's centre is female head. It has a pointed chin, and all facial features are elongated horizontally and are bunched up. It has cupped ears, and the cylindrical head covering or coiffure is deeply incised crisscrossing lines. The back of the comb is flat as is the top of the head.

A one piece yellow-brown shaft which continues into a dark brown rounded elbow-shaped end. On the opposite side to the elbow projection is a flat rectangular metal blade inserted on a downward angle and perpendicular to the shaft in dark brown wood. The upper blade corners are rounded and the corners at the sharpened slightly convex end are squared. 'X' with upside down 'v' joining two lines is engraved on the blade's underside.

Brown wood shaft with one end blackened, large, angled while the other end has a rounded knob which is elbow-like and flaring. Swirling grain and burled top. Attached by tang through the knob's middle is a slightly flaring thick metal blade. Blade begins as recessed from thick tang. Blade's flattened surfaces face right and left and are decorated with evenly-spaced double notches. Base of butt end is incised with evenly-spaced vertical and horizontal lines.

Thick brown wood shaft with blackened ends. One end is large and angled while the other end has a rounded knob which is elbow-like with carved recessed circles clustered on either sides. Attached by tang through the knob's middle is a wide metal blade which begins abruptly from tang, flares out to points, and has a convex edge. Flattened surfaces face the left and the right. Row of three incised diamonds decorate each blade side and tang has two incised rings around the circumference. Row of spaced recessed circles decorate circumference of butt end.