Deep painted tray that is divided into four compartments. The sides of the tray flare out from the square base. The interior bottom of the tray is painted with a black design, a circle within four corners with a four point star at centre, partially covered by the divivder. One wall of the divider has a curved upper edge that extends above the sides of the tray and has a hole drilled through it with a fabric tie attached. The sides of the tray and the divider have all been painted with formline designs in black, red and green.

Kente cloth composed of eighteen hand woven cloth strips. The strips have been stitched together along the long edge and have embroidered designs overtop. Each strip has a repeating stripe pattern; done in dark blue, white, light blue, maroon, yellow, green, and red. The embroidered designs are in the centre of the cloth and consist of rectangular blocks, plain stripes and ladder-like stripes; done in yellow, dark green, blue, orange, blue-grey, green-grey and white. Tag attached to bottom right corner.

Kente cloth composed of twenty-two hand woven cloth strips, forming ten rows. Four strips span the entire length of the textile, six rows consist of three shorter strips. All have embroidered designs overtop. Each strip has a repeating stripe pattern; done in orange, light blue, white, light purple, dark blue, and red. The six shorter strips along the right side are attached to the cloth upside down, causing the pattern to break in the bottom corner. The embroidered designs cover the entire cloth, except the left edge. The designs consist of rectangular blocks, plain stripes and ladder-like stripes; done in shades of yellow, green, red, white, orange, blue, and purple.

Kente cloth composed of twenty-three hand woven cloth strips. The strips have been stitched together along the long edge and have embroidered designs overtop. Each strip has a multi-coloured checkered pattern; done in black, yellow, red, green and blue. The embroidered designs in the centre of the cloth consist of rectangular blocks, plain stripes, ladder-like stripes and geometric motifs; done in dark yellow, black, dark red, blue, green, and light orange. Left and right edges are covered entirely in embroidery, consisting of a rectangular block design. Blocks are filled with horizontal and vertical stripes, checkers, and parallelogram-like shapes; done in dark orange, dark red, dark yellow, green, yellow, dark blue and light pink. Tag attached to back bottom right corner.

Large ndop cloth composed of twenty panels sewn together with plant fibre. The indigo-dyed panels have been stitched together along the short edge and have off-white designs throughout. Designs are done in vertical bands and filled with geometric and linear motifs. Motifs include: abstract interlocking “X” shapes, dots, zigzags, concentric diamonds, segmented circles, grid-like patterns, and connected lines.

Wooden halibut hook (part a) with wooden B-shaped float and detached metal barb (part b). Float attached to hook by thick cord wrapped in cedar root. A section of twisted cord extends beyond the float in a loop. The barb has lashings around its base.

Round, burnished, black pot with a side by side double diamond design carved around the sides three times. Each diamond is composed of rows of smaller raised diamonds. The form is globular, with a flat circular base, and wide circular mouth. A round, woven basketry piece (part b) fits over the opening as a cover. The cover is woven in a coiled design.

Large antelope puppet head (part a) with detached horn (part b), and a separate manipulation stick (part c). The face of the animal is painted in a plaid pattern of red, white, green and yellow squares with concentric V's on the forehead - red, black, white, green and yellow, and a white heart-shaped nose. The horns are both broken, with one detached. In between the horns is a small human figure with bright pink skin, wearing a beige tunic. The figure's arms are jointed at the shoulders, and are controlled by blue string. The manipulation stick is inserted into a rectangular hole at the back of the head.

Headrest, or stool, carved from a single piece of wood. The headrest is solid, with both top and sides concave, and resting on an oval base. The sides are incised with designs in an overall concentric V pattern with each composed of zigzag lines.

Headrest carved from a single piece of wood. The upper surface is flat and smooth, and curves upwards on either side. The rest sits on a pedestal at centre with a rectangular support, and then two layered cones.