FROM CARD: "ILLUS.: HNDBK. N. AMER. IND., VOL. 5, ARCTIC, PG. 351, FIG. 3. WOLF KILLER....STRIP OF BALEEN SHARPENED AT ENDS, SOFTENED BENT, BOUND INTO SHAPE... EXCHANGE- DR. FRANZ BOAS-AM. MUSEUM OF NATURAL HISTORY. JUNE 9. LOANED TO CHILDREN'S MUSEUM 4/30/78. CAT. #7442 RETURNED 6/22/81. LOAN: U.S.I.A. INUA JUN 24 1988. ILLUS.: INUA CATALOGUE. USIA 1988, PL. 50, P.37."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/163 , retrieved 1-28-2020: A set of five wolf killers, each made from a strip of baleen with ends that have been cut at an angle, and folded several times and tied with sinew. More information here: http://www.inuvialuitlivinghistory.ca/item_types/63: Wolf killers were made from strips of baleen that were sharpened at each end. They were used by folding them lengthwise, wrapping them in fat and letting them freeze. When swallowed by a wolf the fat would thaw out and the folded strip would return to its original shape inside the animal.

FROM CARD: "INVENTORIED 1977."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/162 , retrieved 1-8-2020: Saw with an iron blade and a handle made of whale bone. The blade is rectangular, and has teeth along both edges. The blade is set into a bed cut into one face of the handle, and is held in place with three copper rivets. On the opposite face of the handle are three shallow circle and dot' incisions, which may have signified ownership of the tool. More information here: http://www.inuvialuitlivinghistory.ca/item_types/49: Saws for cutting wood, bone, antler and ivory had thin metal blades attached to bone handles. Shallow notches in the saw blades were made by striking the edge with the thicker blade of a knife.

FROM CARD: "5813-5. 5814 - LENT TO PRINCE OF WALES NORTHERN HERITAGE CENTER 6-3-92. LOAN RETURNED: DEC 21 1992."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/161 , retrieved 1-24-2020: A small ulu with an iron blade and a handle made from antler or bone. The uppermost part of the blade is set into the handle and is further secured with two tangs, each of which had been made from two pieces of antler or bone (one piece is missing from one of the tangs) set into a slot in the handle and attached there and to the blade by copper rivets. More information here: http://www.inuvialuitlivinghistory.ca/item_types/58: An ulu is a knife with a crescent-shaped blade attached to a handle made of wood, bone or antler. The design of an ulu ensures that the cutting force is centred more over the middle of the blade than with an ordinary knife. Ulus are used for skinning animals, scraping skins, cutting hides when sewing as well as for other household tasks. They are sometimes called 'women's knives' since they usually are associated with women's tasks.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/160 , retrieved 1-3-2020: Needle case, strap and belt hook. The needle case is a hollow ivory tube that originally had eight split beads (several of which are now missing) embedded in shallow drilled holes and cemented in place. One end of a hide strap that passes through the needle case has a large blue bead attached that prevents the strap from pulling through the case. The other end of the strap is attached to an an ivory implement of a type that has variously been identified as a belt hook or a holder for skin thimbles. This is a flattened piece of ivory with a slit along the centreline extending half its length at the end opposite from where it is attached to the strap, flanked by two other, shorter, slits that terminate at holes drilled through the piece, probably to prevent them from splitting. More information here: http://www.inuvialuitlivinghistory.ca/item_types/42: Sewing needles were kept in a tube-like case with a skin strap running through the centre. The needles were stuck into the strap, and then pulled into the case. Hooks for fastening the case to a belt, or holders for thimbles made from skin, were often attached to one end of the leather straps.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/159 , retrieved 1-27-2020: Lance holder for the deck of a kayak. It consists of a two-part centre piece made from whale bone that is hinged at the centre, allowing it to fit against the inverted 'V' shape of the deck of a kayak. The hinge has been created by joining the two parts with a hide thong that passes through a hole drilled through each piece at the joined ends. Smaller pieces made from bone or antler are attached at each end with two iron rivets. The faces of the centre and end pieces are cut aslant where they join so that the end pieces extend inwards and upwards at a shallow angle. A piece of hide connects the inner part of the end pieces to the centre piece by passing through holes drilled in each piece, and then wrapping around itself. A hole drilled through the joints at each end would have been used for mounting the holder to the kayak. The upper edges of the centre pieces have five V-shaped projections, and engraved into one face are a series of parallel and zigzaging lines. More information here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/200 , retrieved 1-3-2020: Crooked knife with an iron blade attached to an antler handle with two iron rivets. One face of the handle where it is joined to the blade is curved and has an indentation to provide a grip for the thumb when held in the right hand. The handle is decorated on the same face with two parallel incised lines that follow the bottom edge of the handle. The bottom edge of the handle has a series of indentations to improve the grip. Two holes have been drilled though the handle, possibly for attaching a thong for hanging this tool. The surface of the iron plade shows remnants of cross-hatching typical of the surfaces of files, and it is likely that the blade had been made from a file. More information here: http://www.inuvialuitlivinghistory.ca/item_types/18: Crooked knives were used for shaping wood, bone and antler. The Inuvialuit style of crooked knife has a small blade attached near the end of a curved handle. The knife is held with the fingers of one hand on the underside of the handle, and the thumb positioned on top of the blade in an indentation in the handle. The craftsman rests the underside of the blade against the object being worked, and draws the knife towards the body while using the thumb on the hand holding the tool to check the depth of the cut.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/157 , retrieved 1-13-2020: Three fish lures with lines attached. The shanks of the lures are made from antler. Two have iron hooks and one has a hook made of copper. Each has a baleen line attached to holes drilled through the narrow end of its shank, and shallow holes for decorative insets drilled into faces and edges for decorative insets. The insets that are still in place are all pieces of copper. More information here: http://www.inuvialuitlivinghistory.ca/item_types/21: Fishing tackle was used for catching fish in rivers and streams during the open water season, and for jigging through holes chiseled through ice in winter and spring. Fishing tackle in the MacFarlane Collection includes fishing rods (iqaluksiun) with lines (ipiutaq) made from baleen, and bone and antler lures (niksik) with iron hooks. Less commonly, fishhooks were made from wood.

From card: "Deer skin."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/156 , retrieved 12-19-2019: Tent model; object is not further analyzed or described on the site. More general information here: http://www.inuvialuitlivinghistory.ca/item_types/55: The MacFarlane collection includes models of tents with wooden tent poles and caribou skin covers. Poles of full-size tents were typically about 4 metres in length, and were fastened together at the top and spread out to form a cone. Caribou skins were usually used as tent cover. Tents were used for shelter in summer, and were attached to the entrances of winter sod house dwellings and used for cooking over open fires.

From card: "Goose Lassoes."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/155 , retrieved 2-6-2020: Bolas with five weights made from moose antler attached to braided sinew cords. Each of the weights has a drilled hole for attaching to a sinew cord. The cords have been joined by braiding them together. Several feathers are attached to the end that is held in the hand. More information here: http://www.inuvialuitlivinghistory.ca/item_types/68: The bolas is a throwing implement made of several interconnected and weighted cords. It is used by twirling the weighted cords, and then casting them at low-flying birds, entangling the birds in the cords.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/154 , retrieved 12-30-2019: A belt fastener made from a rectangular piece of ivory. Fifteen small beads are inlaid in one face. A metal eyelet attached to the other side, where it is held in place with a metal pin that runs sideways through the fastener, would have been used to attach the fastener to a belt.