Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/62 , retrieved 2-7-2020: A small infant's parka made with fetal or newborn caribou hide. Strips and pieces of dark and light skins make decorative patterns on the hood, around the hem and on the back of the parka. The opening for the head is trimmed with red wool cloth. Tufts of wolverine surround the sides of the hood. The hem is trimmed with wolverine fur coloured red on the skin side. The shape of the hood, the hem and decoration are similar to women's parkas, suggesting that this garment was for a girl baby. More information on parkas here: http://www.inuvialuitlivinghistory.ca/item_types/44: In winter men, women and children wore skin parkas (qusungat) over an inner garment (atigi). They were skillfully tailored using many individual pieces of skin (usually caribou) chosen for the thickness of the hide and qualities of the hair. Men's and women's parkas each had their own style, evident in the shape of the hood and the hem, and children's clothing mirrored the clothing of adults. Each parka was made to fit one particular individual, with the seamstress measuring with hand and eye and following complex patterns that were handed down from generation to generation. Parkas were decorated by incorporating pieces of skin with shorn hair and contrasting colours, and were sometimes coloured with dyes. The hood, cuffs and hem of the parka were usually trimmed with wolverine fur, which kept the cold out and because frost was easy to brush off the thick and stiff fur.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/61 , retrieved 1-3-2020: Four fish lures with antler shanks and iron hooks. The shank of each lure has two holes drilled through its narrower end for attachment to fishing lines; one lure has a short length of braided sinew still attached to it. The lures are stained green near these holes. This typically is produced by contact with copper, and it is possible that at one time these lures were strung on a piece of copper wire. Each shank is notched along its edges, and one has a shallow bed encircling it. These features would have been used for tying fish skin bait or stone weights to the lures. One of the lures has glass beads inserted in two shallow holes near the hook, in imitation of fish eyes. More information here: http://www.inuvialuitlivinghistory.ca/item_types/21: Fishing tackle was used for catching fish in rivers and streams during the open water season, and for jigging through holes chiseled through ice in winter and spring. Fishing tackle in the MacFarlane Collection includes fishing rods (iqaluksiun) with lines (ipiutaq) made from baleen, and bone and antler lures (niksik) with iron hooks. Less commonly, fishhooks were made from wood.

There are currently two objects with this catalogue number: one is an iron barbed arrowhead, the other is a bone barbed arrowhead. The catalogue card identifies this as "fish spear point iron", so the catalogue number for the bone arrowhead may be incorrect (it possibly could be # 7427 instead?)The bone arrowhead only is described in Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/200 , retrieved 1-27-2020: Arrowhead made from bone. It is self-pointed, with barbs along one edge and a conical tang that appears to have been repaired. A line has been incised on either side of the barbs. Note that this object was originally listed in the Smithsonian catalogue as a fish spear point, but was reidentified by the Inuvialuit project as an arrowhead. The Inuvialuit website notes about other similar arrowheads originally listed as fish spear points, that they are similar in size and shape to arrowheads on arrows in the MacFarlane Collection, and so have been reidentified as arrowheads. More information on arrows here: http://www.inuvialuitlivinghistory.ca/item_types/4: Complete arrows as well as separate arrowheads are present in the MacFarlane Collection. The arrow shafts are made from a single piece of spruce, and typically are 60 to 70 cm. long. Most have been stained with red ochre. The shafts are round in cross section, except near the notch for the bowstring where they are slightly flattened to provide a better grip for the fingers. Fleching consists of two split and trimmed feathers attached with sinew lashing. Several types of arrowheads were used, depending on the game that was hunted. Some of the ochre markings on arrow shafts may have been owner's marks, and some arrowheads are likewise marked with notches and incised lines that might have been used to identify their owner. Community Interpretations Darrel Nasogaluak: Arrowheads were meant to come off the shaft after an animal was struck. My grandfather Edgar Kotokak told me that barbs were cut into only one edge so that the head moved around inside the wound as the animal moved, increasing the chance of killing it.

FROM CARD: "INVENTORIED 1977." Note that these boots are not listed in the ledger book entry for 7726 (which lists only a fire bag, E7726B), but there is a catalog card for the boots 7726A. Presumably, the boots were found later, and a card was made for it, but this was not noted in the ledger. There is also the possibility that the boots were misnumbered / misidentified. It is clearly marked "7725-A" but the ink does not look "old".Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/59 , retrieved 2-10-2020: A pair of boots made with caribou leg skins and bleached seal hide soles. Pieces of white and dark caribou skin make decorative stripes down both sides of the shins. Numerous small skin tags are sewn in at intervals down the stripes. The pointed soles have dense pleating around the fore portion of the foot and the heel. A pointed vamp made up of strips of dehaired dark and light sealskins joins the leg section and the sole. A casement holds a drawstring around the top of the boot. More information here: http://www.inuvialuitlivinghistory.ca/item_types/23: Warm, dry footwear is essential for survival in the Arctic. The MacFarlane Collection includes examples of knee-length boots known as kamaks, and ankle high moccasin-type footwear. These garments have been skillfully made, and often were decorated by piecing together contrasting pieces of skin. The soles are crimped along the front edges to make the shape conform to the foot.

Quiver model with stiffener only; no bow or arrows currently present.Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/58 , retrieved 1-17-2020: Miniature quiver for bow and arrows. It has been made from a piece of caribou skin folded over with the fur inside and sewn with sinew along one side. Hide thongs have been attached along both edges. The quiver is accompanied by a rounded rod made from wood used for stiffening the quiver when it was empty. Stiffeners normally are inserted inside the quiver and held in place with hide thongs. Some of the thongs sewn to the quiver may have been used for this purpose. Others might have been used for tightening the quiver. The quiver and the stiffener have red ochre stains. The stains on the quiver form a pattern consisting of a line extending along the length of the quiver, with smaller lateral lines.

FROM CARD: "METAL BOWL."This object is listed, but not described or analyzed, in Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/57 , retrieved 1-24-2020. General information on pipes is available here: http://www.inuvialuitlivinghistory.ca/item_types/2: Inuvialuit first obtained pipes and tobacco in the 1800s through indigenous trade networks that stretched through Alaska and as far as Siberia. The MacFarlane Collection includes twenty pipes of this northern style. The bowls are made from metal, wood or stone, and with one exception the pipes have curved wooden stems split along their length and held together with a skin or sinew wrapping. Commonly a pick used for tamping tobacco and cleaning the bowl is attached to the pipe.

This object is listed, but not described or analyzed, in Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/56 , retrieved 1-31-2020. General information on drills is available here: http://www.inuvialuitlivinghistory.ca/item_types/20: The bow drills in the MacFarlane Collection were used for boring holes into wood, antler, bone and ivory. The drill spindle (shaft) has a bit at one end, and the other end is shaped to fit into a bearing that is held between the teeth. The spindle is rotated by wrapping a slack thong attached at each end of a drill bow around it, and moving the bow back and forth. Ancestral Inuvialuit also used another type of bow drill for starting fires.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/54 , retrieved 1-3-2020: A pair of gloves, possibly made of caribou skin. More information here: http://www.inuvialuitlivinghistory.ca/item_types/24: Gloves in the MacFarlane Collection are made from caribou skin, and often are decorated with beads, wool or by piecing together contrasting pieces of skin. Gloves might be worn with outer mitts for added warmth.

FROM CARD: "FRAME OF WOODEN STRIPS. COVERED WITH SKIN; MANHOLE IN THE CENTER; BOW AND STERN BEAKED; PADDLE ACCOMPANYING. LENGTH, 20 INCHES. SENT AS A GIFT TO MUSEUM OF NATURAL HISTORY, BATTLE CREEK PUBLIC SCHOOLS. BATTLE CREEK, MICH., OCT.7,. 1924. 1666: INVENTORY RECORDS NOTE OBJECT STILL HERE. BATTLE CREEK OBJECT #1666 IS SMALL POT. SI #1666 SHOULD BE CHECKED FOR INCORRECT NO. (SEE ACC. #9899.)."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/53 , retrieved 12-19-2019: Model of a kayak with prominent upturned ends that are distinctive of Inuvialuit kayaks. The frame is made from wood, and the cover is made from several pieces of hide stretched over the frame and stitched together. Deck lashings made from braided sinew for holding hunting implements are attached fore and aft of the cockpit, and a lance holder made from bone or antler is attached near the front end. The lashing in front of the cockpit has a bead attached to it, possibly representing a rest for a lance or harpoon used in conjunction with the holder. The model includes a two-bladed paddle and a throwing board, both of which are made of wood. The paddle is decorated with red and black lines made using ochre and charcoal encircling the blades. The throwing board has ochre lines on its upper surface. More information here: http://www.inuvialuitlivinghistory.ca/item_types/32: Inuvialuit used lightweight kayaks for hunting whales and seals, setting and hauling fishnets, and spearing swimming caribou. The frames were made from driftwood, and skins of seals or beluga whales were used for covers. Inuvialuit kayaks had distinctive upturned stems that were useful for lifting them from the water. Full-sized kayaks would have been difficult to send to the Smithsonian Institution, and MacFarlane instead collected accurately made models.

FROM CARD: "INVENTORIED 1976."Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/52 , retrieved 1-8-2020: A pair of boots with caribou hide uppers and seal hide soles. The soles are loosely crimped, and ties are sewn into the seam connecting the soles to the uppers. A casement and draw string encircles the top of each boot. More information here: http://www.inuvialuitlivinghistory.ca/item_types/23: Warm, dry footwear is essential for survival in the Arctic. The MacFarlane Collection includes examples of knee-length boots known as kamaks, and ankle high moccasin-type footwear. These garments have been skillfully made, and often were decorated by piecing together contrasting pieces of skin. The soles are crimped along the front edges to make the shape conform to the foot.