AMEC Analysis: Part: Whole Bottle Type: Whiskey/Liquor Neck Finish: Lipping Tool Decoration: Embossed Comments: The sides of the bottle are embossed with "London England Gordon's Dry Gin" and the base is embossed with a dragon's head. A cut glass stopper is still lodged in the mouth. One clear glass gin bottle with french square base and finish similar to grooved ring except that there is no space between upper and lower ring and the lower ring is flared out at the bottom. Remnants wrapper remain on neck/finish, probably tin. Mold seams are difficult to see. Two vertical seams on both sides of the bottle up the body to the beginning of the wrapper, unable to determine if they extend up finish. Front and back are embossed with the same Maker's Mark: GORDON'S DRY GIN LONDON ENGLAND Dried substance present on inside and outside of bottle. J. Dougherty 03/22/2010

AMEC Analysis: Part: Whole Date: 1906 Neck Finish: Lipping Tool One aqua glass liquor bottle with round bottom. Finish is similar to reinforced extract finish, though round rim is below finish, instead of at top. Also similar to straight brandy or wine finish, except that bottom ring is much larger and extends beyond the width of the rest of the finish area. Post bottom mold. Mold seams include: circular seam on base, two seams extending to approx. 0.5 inches below the collar. Maker's Mark embossed on bottom reads: A. B. Co. C 6 Bubbles present in glass. Dried substance present on inside and outside of bottle and slight abrasions on outside of bottle. Crazing present throughout body of bottle. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Owens Ring/Cutoff Scar Neck Finish: Automatic Machine One green glass liquor bottle with round base and crown finish. Post bottom mold with concentric circles near center. Mold seams include: circular seam on bottom, two seams extending up both sides of bottle through the top of the finish, circular seam just below the collar. "R 108" embossed on lower side. Dried substance present on inside of bottle. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Bottle Type: Alcohol Neck Finish: Lipping Tool One olive green glass beverage bottle with round base and packer finish. Base has push-up with embossed: B 9 Mold seams include: horizontal circular seam at shoulder, two vertical mold seams extending from shoulder to bottom of finish, horizontal circular seam at bottom of base. Symmetry of base and seam molds indicate three-part dip mold. Bubbles present in glass and abrasions on outside of bottle. Dried substance present on inside of bottle. J. Dougherty 03/22/2010

AMEC Analysis: Part: Whole Neck Finish: Lipping Tool Manufacture method: post bottom Comments: The bottle has very heavy seams and is misshapen indicating an earlier date within its range. One brown glass beer/ale bottle with round base and crown finish. Cup mold seam at heel with two mold seams extending up both sides of bottle to approximately 1/2" of finish. Base features embossed Maker's Mark reading: S. C. Co. 10 Bubbles present in glass near seam molds. Dried substance inside and outside of bottle. One chip at heel. Abrasions near side mold seam. J. Dougherty 03/17/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Owens Ring/Cutoff Scar Neck Finish: Automatic Machine Comments: "78R" is embossed on the side. One brown beer bottle with round base and crown finish. Post bottom mold with concentric circles near center of base. Seam molds include: circular seam on bottom, two seams running length of bottle through top of lip, one circular seam just under collar. "78R" embossed on lower side. Some abrasions and dried substance present on outside of bottle. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Owens Ring/Cutoff Scar Neck Finish: Automatic Machine Comments: "66R" is embossed on the side. One brown beer bottle with round base and crown finish. Post bottom mold with concentric circles near center of base. Seam molds include: circular seam on bottom, two seams running length of bottle through top of lip, one circular seam just under collar. "118R" embossed on lower side. Some abrasions and dried substance present on outside of bottle. One accretion fell off exterior of bottle during cataloging. Accretion bagged and labeled. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Owens Ring/Cutoff Scar Neck Finish: Automatic Machine Comments: "118R" is embossed on the side. One brown beer bottle with round base and crown finish. Post bottom mold. Seam molds include: circular seam on bottom, two seams running length of bottle through top of lip, one circular seam just under collar. "66R" embossed on lower side. Some abrasions and dried substance present on outside of bottle. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Owens Ring/Cutoff Scar Neck Finish: Automatic Machine Comments: "R 104" embossed on the side One brown beer bottle with round base and crown finish. Three part mold based on a post-bottom mold seam with concentric circles near center of base. Seam molds include: circular seam near center of base, two seams on each side of bottle extending to the top of the lip, circular seam around shoulder, circular seams just under and over collar and circular seam just under sealing surface. "R 104" embossed on lower side. Some abrasions and dried substance present on outside of bottle. J. Dougherty 02/22/2010

AMEC Analysis: Part: Whole Bottle Type: Condiment Diagnostic Base Mark: None Neck Finish: Lipping Tool Decoration: Indeterminate Comments: "G 14" embossed on the base One clear glass bottle with round base and tapered down finish. Embossing on bottom reads: "G14". Dried substance present on inside of bottle. Iridescence on outside of bottle, one section with crazing. Bubbles present in the glass. J. Dougherty 03/19/2010