Spear with metal spearhead that has curved sides, a pointed tip, a centre ridge, and a short cylindrical shaft. The spearhead is attached to a wooden shaft with a piece of skin that has been secured with a sewn seam and several pieces of twine. The butt end of the wooden shaft flares slightly.

Dagger that is double-ended and each blade double-edged. One blade is much shorter than the other. Concave blades, each with double ridges on upper surface. The handle is wrapped in leather and bound with cord.

Trapezoid-shaped wooden box with a hole on the top face near the widest end, and a series of 17 long metal prongs with rounded tips are elevated and secured above the box by wood and metal bars at the narrower end. Two smaller holes on the underside near the centre. The wood is stained, and five of the metal prongs are coated with red paint on the top surface. Hugh Tracey manufacturer label on bottom.

Spear with metal spearhead that has curving sides, a pointed tip, a centre ridge, and a short cylindrical shaft. The spearhead is attached to the long wooden shaft with skin that has been stitched closed and secured with a piece of twine at both ends. The butt end of the shaft flares slightly.

Axe head with overall triangular shape. Edges flare slightly at curved blade edge.

Spear with metal spearhead that has curved bottom edges, a short neck, straight sides that taper to a point (broken), and a centre ridge. The spearhead is bound to the wooden shaft with metal wire woven around the spearhead shaft and the wooden shaft, and the butt end of the wooden shaft flares outwards and then tapers inwards with four sides to a flat end.

Metal dagger, triangular in shape with a rectangular shaft that curves at the end.

Axe composed of a wooden handle covered in copper with a rounded top end and a flaring butt end, a blade with two curves emerging from two small peaks at the centre of the blade and each ending in a serrated edge, and three arms that support the blade. The two outer arms are made of twisted metal, and the centre arm has two low relief faces on each side. The blade is decorated with a line of dots along the inner edge.

Slightly triangular-shaped flat light brown wood piece. Ten metal tongues (keys), evenly-spaced in a row, placed lengthwise to the wood piece, and upraised at an angle by a metal bar. Square hole at one end with a rectangular hole on one side.

Black metal sword with a blunt, flaring blade and a round, disk-like pommel. Arabesque knot designs on the blade and simple geometric designs on the handle.