Spoon carved from one piece of wood with a shallow bowl that has a pointed tip, a handle with a roughly circular tip, and designs in poker work featuring bands on the handle where it meets the bowl and a triangular shape at the bowl tip as well as two lines that border the bowl rim.

Spoon made from one half of a gourd with poker work designs applied to the inner surfaces. Several lines are burnt into the handle edges, the tip of the handle is blackened, and the edges of the bowl are blackened with a series of lines at the front centre of the bowl edge. A symmetrical design consisting of two v shapes and two crescent shapes joined by a darkened area decorates the inner bowl and an x shape ornaments the bowl where it tapers to a handle. The inner handle is decorated with two lines tha run lengthwise.

Wooden headdress consisting of a rectangular piece of wood with a semi-oval cut out of the centre bottom; painted in blue, yellow, green, black and red. The front has a flower in the centre and two feathers on each side. The back has clouds and lightning with two feathers on either side. The front has a circular bundle of fibre attached. There is a thick leather strip that attaches at the back and hangs down past the edge of the wood. A second piece of leather runs horizontally across the opening.

Large, carved, wooden, raven hamatsa mask with a long beak, an ovoid shaped projection on the ridge and thin, ovoid shaped cutout nostrils. The beak is hinged with pieces of leather nailed to either side. The beak is painted black with a red mouth and nose. From the edge of the mouth to the back of the nose are a series of red u-forms ending in a split u. At the back of the mouth are two white u-forms. The bridge has white and red detailing. The eyes are white, outlined in black and red, on a white ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. The bottom is black with a white U-form. The mask is painted black, red, and white with Northwest Coast stylized designs.

Large, carved, wooden, hokhokw mask with a long beak and circular cutout nostrils. The beak is hinged with pieces of leather nailed to either side. The beak is painted black with a red mouth and nose. Along the front end of the beak are ten, white, incised U-forms. At the back of the nose are two large black and red U-forms followed by smaller red and white split U’s outlined in black. The eyes are white, outlined in black and red, on a white, ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top and side edges of the mask are lined with braided cedar. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. Intertwined in the cedar are a few feathers. The bottom has crooked beak depicted with black and white eyes, red and white mouth and a protruding, crooked beak. The mask is painted black, red, and white with Northwest Coast stylized designs.

Large, carved bird mask with a long beak, a high bridge and ovoid shaped cutout nostrils. The beak is hinged with pieces of rubber nailed to either side. The beak is painted black with a red mouth and nose. At the back of the nose is a large red split U-forms. The bridge has six red U-forms on the bottom and eight, white U-forms on top. The eyes are white, outlined in black, on a white, ovoid shaped background; brow is black. Underneath the eye is four white U’s. The inside of the mask is hollow with the exception of twine used to open and close the beak along with a fibre cloth. The top and side edges of the mask are lined with braided cedar. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. The mask is painted black, red, and white with stylized designs.

Large, carved, wooden, raven hamatsa mask with a long beak and two sets of s-shaped cutout nostrils. The beak is hinged with pieces of leather nailed to either side. The beak is painted black with a red mouth and nose. At the back of the mouth are three red ovoid-like shapes. Surrounding the nose are two s-shapes and three elongated s-shapes. The eyes are white, outlined in black, surrounded by red, on a white, ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top, side and bottom edges of the mask are lined with braided cedar. The top and sides have short bundles of cedar creating a fringe. Intertwined in the cedar are a few feathers. The underside of the mouth is painted black with a small white and red design. The mask is painted black, red, and white with Northwest Coast stylized designs.

Large, carved, wooden, raven hamatsa mask with a long, tall, beak and cutout nostrils. The beak is hinged with pieces of rubber nailed to either side. The beak is painted black with a red mouth and noses. Along the back of the nose to the back of the mouth are red U-forms and other shapes outlined in white. The eyes are white, outlined in black, surrounded by red on a white, ovoid shaped background; brow is black. The inside of the mask is hollow with the exception of twine used to open and close the beak. The top has short pieces of cedar creating a fringe, while the back has longer strips that hang over the wearer. Intertwined in the cedar are many feathers. There is a piece of cloth that hangs down over the front of the wearer. The mask is painted black, red, and white with Northwest Coast stylized designs.

Carved, wooden, raven-kolus transformation mask. The exterior raven consists of a long black beak, red mouth and cutout nostrils. The eyes are white, outlined in black on a white background surrounded by a green ovoid; brow is black. The mask opens in four directions – to the sides, up and down – exposing kolus with a short white beak, red mouth and nostrils. The eyes are white, outlined in black on a white background surrounded by a green ovoid; brow is black. The side boards depict its wings; top its tail feathers while the bottom open board is detailed with ovoids, U’s and split U’s. Twine cord attaches to all four sides to assist the mask in opening and shutting. The opened boards are hinged with leather and attached by nails. The mask is painted white, black, green and red with Northwest Coast stylized designs. Long strips of cedar hang down the back covering the head of the wearer.

Wooden, carved, oval shaped, human transformation mask with a small bear mounted on the head like a headdress. The front of the mask is a large human face with red mouth and nose, black moustache and black outlined eyes on a white circular background surrounded by a green ovoid. The face is outlined in white. The bear has a long snout painted black with white edging. The nose and mouth are red. The mask splits down the centre and opens to expose another human/whale face. The inner face is detailed exactly like the outer face with the exception of killer whale motifs painted on the cheeks and forehead. The eyes have drilled holes. The opened boards are hinged with leather and nails; they are painted white with human hands and arms. The back of the bear has many twisted cedar strips that hang. The outer face is lined with small bundles of cedar. The mask is painted dark green, black, white and red with Northwest Coast stylized designs.