Hook (part c) attached at the end of a long pole (a). Pole is an elongated tube; one end is closed with an iron ring attached through a hole; a three dimensional iron fish is attached by a chain to a protruding, curved piece of iron attached at the open, bottom end of the pole. An iron rod (part b) projects from the bottom, open end of the tube, impaling the metal fish through the head; an iron hook (c) is suspended from a knob at the end of the rod (b).

Arrow consisting of a long cylindrical wooden shaft with one notched end and a metal point at the other, secured with wrapped sinew. The triangular point has a double notched base and a narrow stem. At the midpoint of the metal stem has an oval hole. String is tied around stem where stem enters the shaft. At opposite end of shaft are two strips of feather secured by wrapped sinew. Red pigment, possibly ochre, is present on the basal end. The basal end of the shaft is notched.

Round, bronze bowl with dark dull patina merging to black on underside; surface rough in some places. Flat base, on 3 feet like clam shells; straight sides, rounded and flaring out near mouth with rim turned outward. Horizontal loop handles in wave-like design set below rim. Turning marks are visible on inner surface; mended break below one handle near base. On outer surface below rim is a band of leiwan pattern, enclosed by heavy bands, below which are 8 floral-appearing tao-t'ieh motifs. Mark in 3 Chinese seal characters 'Made by Song Eun'.

Carved dark brown wood shaped like elongated pear in transverse cross section. Wider end hollowed to form a bowl-like depression. Inserted vertically through narrow end is a wheel with a cleft deep cut around its perimeter, .9 cm. from each side. Wheel mounted on brass axle with brass handle projecting 4.3 cm. from one side. Traces of thread in cleft. Hole lined with white glass tube bored through from wheel to inside bowl with similar hole opposite from inside to outside of bowl. Around outside of bowl are carved dragon and cloud shapes.

Large leaf-shaped nose ornament with soldered hook that loops through nose. There is an incision from base of the hook to centre of the face. The metal is bent out of shape at hook's base.

Large steel knife with round carved wooden handle. Triangular blade with point at right angles to handle. Sharp on all edges. Two holes in centre of blade.

Thin leaf-shaped earrings (parts a-b) that have a soldered, round, curved hook at the top. A small incision runs vertically from hook to centre.

Wire frame in shape of t with two cross-pieces; four small pin wheels attached to ends of cross-pieces and one 10.5 cm from bottom of handle. Brass horse with Chinese character on back at top, below which is larger pinwheel with bell at centre, below which is rectangular plaque with four Chinese characters.

U-shaped pitchfork with two pointed tines, each square in cross-section. No handle.

Square, slightly concave cloisonne enamel plate with silver rim; underside covered in solid, slightly speckled light blue enamel with raised single ring foot of silver. Upper side is covered with a design of multi-coloured flowers, with a different large flower in each corner and in centre of plate, and scattered small flowers, all on black ground. Exposed wires are brass; some chips near rim.