Jade boulder cut in grooves and faces.* Fide donor GTE: Long section of mottled jade from which two sections have been cut for implements. These jade boulders were sawed with knives of sandstone. Boulders large and small of jade serpentine and other hard fine grained, tough material, generally greenish in color, are found upon old village sites and camping grounds, grooved on one or both surfaces, cut in two, or cut in a number of faces, with grooves between, and thin broken ridges. These latter indicate where sections were sawed off with the coarse silicious sandstone saws or knives in order to obtain suitable pieces for chisels, celts and adzes. *Information is from the original accession ledger.

Section of very pale jade, green veining. Stein Creek above Lytton, B.C.* Fide donor GTE: Rough section of a very pale jade with bright green veining showing one cut face. From an old village site on or near the Fraser River above Stein Creek called Stein, B.C. *Information is from the original accession ledger.

Worked piece of jade.* Fide donor GTE: Piece of smoothed deep green with grooves cut well in on opposite sides. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.