Minature kayak with long bow tapering to a blunt point--widest just behind u-shaped cockpit. Cockpit is closer to stern than bow and has a raised lip and cavity which appears to have been drilled out, not completely finished. Stern tapers to a point. Side view shows a relatively flat bottom rising to a point at bow. Bottom is slightly bowed up towards stern. Mottled dentine runs the length of kayak and shows on sides and bottom.

Skin covered kayak with a single angled cockpit; relatively flat on top and keel; rounded bow tapers to a point and raises slightly from bottom; stern also tapers to a point and is raised from bottom. Series of evenly spaced (where visible) ribs attach to gunwales; ribs are flat on bottom and curve sharply at sides. Three longitudinal keel supports and additional supports around and extending from cockpit. Numerous skins are sewn together, covering kayak; the skin is sewn to a bent wood rim at cockpit. In front of cockpit is a bone support attached to top, side of kayak by a leather thong which passes through two holes on base of the support and through two holes on either side of kayak. There is a rope attached to the back of the cockpit on both sides. The skin covering is pieced by stitching in numerous places.

Flat bottomed kayak with slightly upturned stern and a long bow. A cavity has been hollowed out with a raised lip around it. There are nine holes pierced through the top, with two sinew threads passing through the set of holes on the bow, and it appears that there were more sinew threads originally.

Miniature kayak with seated figure. Hide stretched over wooden frame. Attached miniature weapons: two harpoons, two killing harpoons, line holder. Style in use since 1930's.

Model kayak made from light brown hide sewn and stretched over a wooden frame (part a). Three dark brown skin weapon straps bridge the width of the kayak: two fore, one aft. A long, double sided wooden paddle (part b) is included.

Hunter in sealskin covered kayak with hunting equipment. The model kayak (part a) is a wood frame covered in tight sealskin; the opening for the paddler has a U-shaped piece of bone(?) around the front, with a wooden slat at the back (nailed in place). The hunter (part b) fits tightly inside the opening and is wearing a sealskin parka, and has a carved stone face; his arms are held in front, holding a long bone(?) paddle horizontally in both hands (skin loops). On top of the kayak, in front of the hunter and tucked under a skin strap, is a bone harpoon attached by sinew to a sealskin line, which sits in folds, with the other end attached to a piece of skin cut-out to look like a seal float, tucked under straps behind the hunter. Next to the harpoon is a long bone hook (part c) that also fits under the strap. The base of the hunter has the artist name and disc number written in green marker. An inside slat of the kayak also has the disc number in green.

Model kayak made of skin, stretched over an internal wooden structure (part a). Strip of antler(?), secured with wooden pegs, lines front keel. Ends of kayak are capped with oval-shaped pieces of ivory(?). Two sinew rigging lines in front of the high-walled cockpit, and one behind. Two ivory fasteners attached to each line. A double-bladed paddle (part b), spear (part c), harpoon (part d), harpoon line rest (part e), and two tools (parts f and g) are separate. The paddle, spear, harpoon and harpoon line rest are made of wood with antler blades (parts c and d) and reinforcement components (parts b, c and e). The two tools are made of antler. The largest (part f) is flat with a straight handle and a curved tapering end. The smallest tool (part g) has a rectangular handle, with triangular indentations along the bottom edge, and a thin pointed tip.

Model kayak carved from antler (part a). Small figure (part b) sits inside cockpit, wearing a hooded parka. Eyes and mouth are incised, nose carved in low relief. Arms are held straight in front of body. Small notches along centre edges of hands to hold a separate double-bladed paddle (parts c and d; paddle is broken). Back of figure is polished; front is rough and dark grey, showing core of antler. In front of the figure, two harpoons are tied to the kayak with white fibre. Animal-shaped harpoon rest, with holes drilled along its length, in between them. Ends of kayak are carved in low relief.

Long model kayak made from dehaired seal skin. The kayaker is attached to the inside seat area of the kayak and consists of an upper body only; he wears a seal fur parka and holds a wooden model paddle out front, in both hands. The figure's face is made out of stocking, with an embroidered face, including part of a blue wool cap (or hair?). There is a separate model harpoon (part b) with a wood handle, antler point and sinew rope, that fits under the skin lashings of the kayak. Model is unsigned.