Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/255 , retrieved 1-27-2020: Lance holder for the deck of a kayak, made from whale bone. It consists of a centre piece shaped to fit against the inverted 'V' shape of the deck of a kayak, with smaller pieces attached at each end with two iron rivets. The faces of the centre and end pieces are cut aslant where they join so that the end pieces extend inwards and upwards at a shallow angle. A piece of babiche connects the inner part of the end pieces to the centre piece by passing through holes drilled in each piece, and then wrapping around itself. A hole drilled through the joints at each end would have been used for mounting the holder to the kayak. One face of the centre piece has incised lines running from each mounting hole almost to the midpoint. More information here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/227 , retrieved 12-17-2019: Lance holder for the deck of a kayak, made from ivory. It consists of a centre piece shaped to fit against the inverted 'V' shape of the deck of a kayak, with smaller pieces attached at each end with an iron rivets. The faces of the centre and end pieces are cut aslant where they join so that the end pieces extend inwards and upwards at a shallow angle. A piece of babiche connects the inner part of the end pieces to the centre piece by passing through holes drilled in each piece, and then wrapping around itself. A hole drilled through the joints at each end would have been used for mounting the holder to the kayak. The upper surfaces of the centre and end pieces are decorated with a series of engraved circles with a the centre. This circle and dot motif is commonly seen on Alaskan Inupiat artifacts. More information here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/225 , retrieved 12-19-2019: Lance holder for the deck of a kayak; not further analyzed or described on the site. See E1118 for same type of object. Further general information on lance holders here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/159 , retrieved 1-27-2020: Lance holder for the deck of a kayak. It consists of a two-part centre piece made from whale bone that is hinged at the centre, allowing it to fit against the inverted 'V' shape of the deck of a kayak. The hinge has been created by joining the two parts with a hide thong that passes through a hole drilled through each piece at the joined ends. Smaller pieces made from bone or antler are attached at each end with two iron rivets. The faces of the centre and end pieces are cut aslant where they join so that the end pieces extend inwards and upwards at a shallow angle. A piece of hide connects the inner part of the end pieces to the centre piece by passing through holes drilled in each piece, and then wrapping around itself. A hole drilled through the joints at each end would have been used for mounting the holder to the kayak. The upper edges of the centre pieces have five V-shaped projections, and engraved into one face are a series of parallel and zigzaging lines. More information here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/147 , retrieved 1-17-2020: Lance holder for the deck of a kayak. It consists of a two-part centre piece made from bone that is hinged at the centre, allowing it to fit against the inverted 'V' shape of the deck of a kayak. The hinge has been created by joining the two parts with a babiche thong that passes through a hole drilled through each piece at the joined ends. Smaller pieces made from bone are attached at each end with an iron rivet. The faces of the centre and end pieces are cut aslant where they join so that the end pieces extend inwards and upwards at a shallow angle. The inner parts of the end pieces are connected to the centre piece by passing babiche and baleen thongs through holes drilled in each piece, and then wrapping around itself. A hole drilled through the joints at each end would have been used for mounting the holder to the kayak. More information here: http://www.inuvialuitlivinghistory.ca/item_types/33: Holders and rests were lashed to the decks of kayaks forward of the cockpit to keep lances and harpoons secure but ready when needed. Lance holders, such as the one illustrated here, were attached close to the bow. The tip of a lance or harpoon would be inserted into one of the triangular openings, and the opposite end of the shaft would sit against a rest that was fastened to the kayak deck close to the cockpit.