Rectangular wooden loom. Centre section has thirty-seven slats, each with a hole at mid-section. Three slats are wrapped with paper. Slatted section is nailed at top and bottom into a three-piece holding frame. Long string, looped and knotted from either end with a loop tied at centre. Short string loops around frame and through slats in centre.

A loom (parts a-j) with an unfinished woven belt. The design consists of three white patterned bands with red and green figurative and geometric motifs all on a red ground. The textile is attached at the top and bottom to cylindrical shaped wooden sticks (part a). Intertwined in the multicoloured warp are two cylindrical shaped heddles; one covered in red twine, the other in brown. There are also two cylindrical shaped wooden tools (parts b and c); five cylindrical shaped wooden tools with a pointed end (parts d,e,f,g,h), all of varying size; one bone pick (part i) and a black and brown braided rope (part j).

Horizontal ground loom (parts a-n) with a partially woven red textile attached to the wooden front beam by bright lashing cords (part b). The woven cloth has five pattern bands and four bands of stripes in red, white, green and yellow. The geometric patterns are of circles, diamonds, crosses and figurative patterns of birds and fish. Intertwined in the textile are numerous parts: cylindrical shaped shed roll (part m) is in position between two layers of warps and back warp beam (part n) holds the loops of the unworked warps. The shuttle stick (part c) is wound with red weft and is attached to the fabric. Heddle stick (part d) has green cord loops. Shed stick (part f) and (part k) are in position under threads in the pattern areas. Ground stakes (parts g-j) are loose as is the pick (part f) and the shed holder and beater (part e). A braided brown, black and cream alpaca rope (part a) is used to keep the loom and tools together when rolled.

Loom (part a) with partially finished belt, 10.7 cm wide, predominantly red, white and green. The design consists of three patterned bands with figurative and geometric motifs. Woven section lashed to loom bar and twisted warps loop over loom bar at the other end. Shed roll (part b) in position between two layers of warps. One heddle bar with string loops extends full width and two sets of string heddles are tied on the warps in the three pattern bands. The red weft is wrapped on a stick. Accompanying the loom are two roughly whittled and tapered pegs (parts b and c), a bone pick (d), six cylindrical pieces of wood (parts d,e,f,i,h,j) all of varying size.

Loom, consisting of a narrow warp-faced band partially woven and still attached to a pointed ground peg. Two sets of multi-loop needles and two single-loop heddles attached to unworked warps. Nine motifs of worked-in white threads on a red and green background. Motifs include a bird, a reverse curve, a cross, diamonds, and circles. Colours are inverted on the other fabric face. Small blue skein of weft attached.

Back strap loom (parts a-h) with associated pieces. An unfinished textile is stretched between loom end sticks (part a). The weaving has been started at the top of the loom. Loom is warped with multi-coloured stripes of solid and resist-dyed cotton ikat (jaspe). Detailed are black, yellow, green, blue, purple and white stripes on a red ground. Intertwined in the warp is a flat, rectangular batten with triangular, pointed ends (part b); a cylindrical shaped heddle covered in white twine (part c); two rectangular sticks of wood with semi-circular indentations (parts e and f); a shed role (part g) and two thin wooden sticks (parts d and h).

Demonstration backstrap loom (part a) with various attached and/or removable pieces (parts b-n). Part a: loom with front and back wooden loom bars with natural multi-ply cotton string warps attached; strings in dyed green and orange interwoven along inside edges of bars; dyed brown weft string interwoven for 13 rows of plain weave, the end of the weft yarn is attached to a pointed stick which is notched for attached yarn at other end. Dyed blue string attached to loom bars and interwoven to lengthwise selvedges. Part b: slightly curved heddle rod of shaved beige stick tied and wrapped by warp from weaving. Part c: separate shaved beige lease stick or bobbin with angled ends and longitudinal splits. Part d: slightly curved shed stick loosely resting in warp. Part e: separate wooden stick loom bar with knotted end. Part f: lease stick with numerous pin point holes, a rounded end, split 4.5 cm. in from end, other end is burnt and beveled. Part g: bamboo lease stick or heddle rod. Part h: separate wooden batten sword with pointed, triangular ends, rounded along one length, tapering to other side. Part i: separate large dark wooden loom bar with notched ends. Parts j and k: wooden support sticks around which green and orange string is attached. Green string loops (tied and glued) hold j to loom bar farthest from weaving. Part l: separate grey/white synthetic rope, burnt at ends with single knot near one end. Parts m and n: carved light wooden shuttles with pointed ends, carved out section with pointed stick through centre, two points at other end, 'J.L.' carved near end.

Backstrap loom with wood and bamboo bars, and rattan backstrap, (parts a-h) held together with knotted string. In order that the pieces occur. Part h is a plaited backstrap with a braided border and that narrows to wrapped handles on both sides. Part g is a flat hardwood sword with rounded ends that are slightly tapering, use-wear shows numerous slight indentations along both edges from the centre, and gives a serrated appearance. Part f is a cylindrical, dark brown hardwood stick. Part d is a hollow, brown bamboo warp beam. Part a is a cylindrical, dark brown hardwood stick with a narrower 2 cm. wide section before each knobbed end. Part b is a wide notched ended hardwood stick with one concave and one flat surface. Part e is like f but of a lighter brown. Part c is like b. String, one side black, other faded to purple-brown tied together, knotted at each element.

A backstrap loom with a partially finished 'patterned band' of red, yellow, green, and white cotton thread, and green synthetic thread tassels. Shed stick is a piece of bamboo 11.5 cm. long with a 1.5 cm. diameter. Bar heddle is formed by loops of white thread knotted together with a piece of grass. Warp is continuous (circular).

Blanket loom. The two upright side pieces (parts a-b) are relatively flat in profile, with three rectangular matching cutouts for the rollers. Small rectangular pieces are nailed beneath the lower two cutouts. The two rollers (parts c-d) are tubular and thickest in the centre. The rollers have sprockets on each end that fit into the upright cutouts.